Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 53 users online :: 5 registered, 0 hidden and 48 guests


Most users ever online was 218 on Wed Dec 07, 2016 6:58 pm

Registered users: Bing [Bot], Exabot [Bot], Google [Bot], MSNbot Media, Yahoo [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

I've found this Blow Gun Where can I make a pressure chamber

Built a BB Machine Gun? Then post it here! This section is for completed, finished cannons that you have built. Please include pictures and information.
Sponsored 
  • Author
    Message

I've found this Blow Gun Where can I make a pressure chamber

Unread postAuthor: omar123omar » Sun Oct 18, 2009 11:55 am

here is the link for the pic. http://www.flickr.com/photos/bulletman/4022965390/

For the barell, i'll be using a barell like B102-6 in the picture but in the top of it it's open, not closed.

here is a link for the barell
http://www.flickr.com/photos/bulletman/4022223151/

The only problem is the pressure room, from What can i do it (I prefer not with a coke plastic bottle) or is ther something I can use it for the chamber?

Do i need a piston, or just put the bb(plastic) inisde the barel and shoot?
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Unread postAuthor: twizi » Sun Oct 18, 2009 12:03 pm

what presure u using jsr used this with a 6 mm barrel and got 600fps i think u could use some steel fitting witch are good to 1000psi plus
  • 0

dont play with airsofter with 1000$ gun and play with a 5 dollar pair of glasses
User avatar
twizi
Colonel
Colonel
 
Posts: 511
Joined: Thu Nov 27, 2008 9:04 pm
Location: up yours
Reputation: 0

Unread postAuthor: omar123omar » Sun Oct 18, 2009 12:14 pm

Do i need a piston, or just put the bb(plastic) inisde the barel and shoot?
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Unread postAuthor: Crna Legija » Sun Oct 18, 2009 12:14 pm

so are you using a blowgun as the main valve or to pilot a piston?

if its just a blowgun you would put the chamber under the blowgun where the hose would go. you can use plumping parts for a tank like a short section of pipe with threads on both end a end cap with you fill setup and the other end a reducer to 1/4 to fit the blowgun.

it wont be the powerful because blowguns don't have much flow, you could try to mod it

if you wont if to have some really power better of using a piston valve it will bump up performance a LOT and handle more pressure.

in the barrel all you need is the bb no piston they are for separate valves
http://www.spudfiles.com/spudtech_archi ... =5&t=13265
  • 0

'' To alcohol... The cause of, and solution to, all of life's problems.”
--Homer Simpson

Add me on ps3: wannafuk, 8/11/11 cant wait
User avatar
Crna Legija
Major General
Major General
 
Posts: 2333
Joined: Sun Jul 20, 2008 5:14 am
Location: australia
Reputation: 0

Unread postAuthor: omar123omar » Sun Oct 18, 2009 12:18 pm

What do you mean by blowgun as the main valve or to pilot a piston.

I didn't understand!
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Unread postAuthor: qwerty » Sun Oct 18, 2009 12:21 pm

Ive used one simaler to these and the flow is terrible! a schrader would be better i would recomend using something with alot more flow.

you dont need a piston you can just put the bb inside
But if you dont have any alternative you could make it into something like this





http://www.spudfiles.com/forums/my-plinker-t16854.html

or alwonovich's gun but i cant find the link.
  • 0

I visit occasionally to make unrelated posts.
User avatar
qwerty
Colonel
Colonel
 
Posts: 677
Joined: Sun Apr 12, 2009 2:16 am
Location: Evesham, Worcs
Country: United Kingdom (uk)
Reputation: 0

Unread postAuthor: omar123omar » Sun Oct 18, 2009 12:22 pm

If i want to buid a piston, how to do it and where can i place it?


Do you think making this one is better, and which one is more powerful?(mine or his)

http://www.spudfiles.com/forums/my-firs ... 19467.html
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Sponsored

Sponsor
 


Unread postAuthor: qwerty » Sun Oct 18, 2009 12:26 pm

You haven't made one yet :wink:
Do you mean this one if you built it? And also FPS or energy?
And yes you could just make a ball valve gun even though they aren't that powerful you will still be impressed with the results. :)
  • 0

I visit occasionally to make unrelated posts.
User avatar
qwerty
Colonel
Colonel
 
Posts: 677
Joined: Sun Apr 12, 2009 2:16 am
Location: Evesham, Worcs
Country: United Kingdom (uk)
Reputation: 0

Unread postAuthor: MrCrowley » Sun Oct 18, 2009 1:19 pm

Omar, you obviously have no idea what the hell you are doing. Go do some research so we can actually help you. Don't post in this thread again until you know what you are doing. Look on the forum, look on the SpudWiki (check the top of the page for a link to the Wiki), but you haven't even bothered to do research, which is actually against the rules (like double posting).
  • 0

User avatar
MrCrowley
Moderator
Moderator
 
Posts: 10207
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Country: New Zealand (nz)
Reputation: 4

Unread postAuthor: omar123omar » Sun Oct 18, 2009 1:48 pm

I've understood evrything. Blowguns flow is not high (this means that not much air will go out)

I understood that ball valves (after oiling) are better than blowguns.

In my case, i'll use a blowgun ( here is the link of the blowgun
http://www.flickr.com/photos/bulletman/4022965390/ )

as a trigger.

For the barel this is the pic http://www.flickr.com/photos/bulletman/4022223151/

Can you please give me some advices and tips ( i prefer using blowguns if you are going to tell me change your blowgun to something else)
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Unread postAuthor: c11man » Sun Oct 18, 2009 5:29 pm

i suggest go wander off to the land of the wiki as Mr.crowley suggested. its just annoying when you have no clue as to what your doing
  • 0

User avatar
c11man
Brigadier General
Brigadier General
 
Posts: 783
Joined: Fri Feb 06, 2009 4:37 pm
Location: Wisconsin, USA
Country: United States (us)
Reputation: 0

Unread postAuthor: omar123omar » Mon Oct 19, 2009 8:06 am

I've read the WIKI on the top of the page, and yes I know what I am doing.

Can I use a small fire extinguisher as a pressure chamber?
  • 0


omar123omar
Private
Private
 
Posts: 15
Joined: Wed Oct 14, 2009 11:36 am
Reputation: 0

Unread postAuthor: twizi » Mon Oct 19, 2009 4:19 pm

i agree with mr c if u dont now were to put the air in in a blowgun you should not get into this hobby
  • 0

dont play with airsofter with 1000$ gun and play with a 5 dollar pair of glasses
User avatar
twizi
Colonel
Colonel
 
Posts: 511
Joined: Thu Nov 27, 2008 9:04 pm
Location: up yours
Reputation: 0

Unread postAuthor: Mr.Sandman » Mon Oct 19, 2009 5:19 pm

twizi wrote:i agree with mr c if u dont now were to put the air in in a blowgun you should not get into this hobby
Actually crowley said that he should learn what the hell he is doing. not give up and go away. Hmm maybe we should have a mandatory letter that is sent to someone automatically when they join. back on topic. Omar, you need to look around the forums some more before posting. It will make you not seem like some random idiot.
  • 0

Yeah, it's that important.
User avatar
Mr.Sandman
Donating Member
Donating Member
 
Posts: 762
Joined: Fri Mar 28, 2008 9:10 am
Country: Antarctica (aq)
Reputation: 0

Unread postAuthor: maverik94 » Mon Oct 19, 2009 6:54 pm

it wont be the powerful because blowguns don't have much flow, you could try to mod it
A modded husky blowgun can be QUITE powerful, especially with long barrels. I shot a plastic mardi-gras bead through a pop can filled with water using a blowgun as my main valve using only 200 psi. Now, obviously piston valves have a LOT more power, but of course I think for a beginner like you, just a blowgun valve (modded) would do just fine. However, I agree that you need to do some research before you post. Try using the spud wiki and just browsing the how-tos and showcase sections. Good luck, we will help you, but we won't spoonfeed you.
Can I use a small fire extinguisher as a pressure chamber?
I would say that would be overkill. Go to the plumbing section of your local home depot or Lowes or the equivalent, and find brass or steel pipe nipples (pipe with treads on both ends) and fittings (like caps, couplings, and reducers) Make yourself a small chamber, that way you won't be pumping all day for each shot. Don't expect awesome perfomance or accuracy from your first gun. Just build it, and learn from your successes and failures. (I find I tend to learn more from my failures than my successes) Don't be afraid to fail, most of us have failed more than we have succeed, at least i have.
Omar, you obviously have no idea what the hell you are doing. Go do some research so we can actually help you. Don't post in this thread again until you know what you are doing. Look on the forum, look on the SpudWiki (check the top of the page for a link to the Wiki), but you haven't even bothered to do research, which is actually against the rules (like double posting).

i agree with mr c if u dont now were to put the air in in a blowgun you should not get into this hobby

I think positive encouragement rather than berating(sp?) people tends to be more successful. I mean, don't tell someone they shouldn't even try to do something before they even have the chance to try it! I agree we shouldn't spoonfeed, but lets try and be a bit more friendly maybe?
  • 0

"You can't be friends with anyone if you aren't friends with yourself."
"I'd rather be hated for who I am, than loved for who I'm not." -André Gide
Give me a lever long enough, and a fulcrum on which to place it and I shall move the world.
–Archimedes
Defeat is always momentary.
–Carl Denham

Current Project: None, I'm in Spudremission.
User avatar
maverik94
Colonel
Colonel
 
Posts: 558
Joined: Wed Jan 21, 2009 4:48 pm
Reputation: 0

Next

Return to BB/Airsoft/Pellet Gun Database

Who is online

Registered users: Bing [Bot], Exabot [Bot], Google [Bot], MSNbot Media, Yahoo [Bot]

Reputation System ©'