| Author |
Message
|
| Solo |
 Posted: 04/10/2007 18:18 PM Post subject: Coke bottle strafer (short burst) |
 |
|
Private First Class
Joined: 05 Jan 2007
Posts: 33
141.55 Spud Bux
|
I had a crazy idea for a dirt-cheap plastic soda bottle bb strafer. Have a 3' barrel with the breach end epoxied closed, a few small holes drilled in the barrel about 1' from the breach end to let the air in. then glue the barrel in thru a hole a bottle cap, so that the air holes are just inside the bottle. Put a ball valve in the barrel right outside of the cap. Put a schrader valve through the bottom of the bottle. That's your gun.
How it works: load your bb's down the barrel. Close the ball valve. Pump the bottle up. Open the ball valve. The gun operates on the Vogt cycle, firing one bb at a time until they are all gone. It also owes the ball valve and the mag-in-chamber idea from Jack/FMJ. Then the rest of the air probably just gets vented. (Unless you wanted to put a second ball valve on the barrel, and then you could use the space between them as an 'air lock' to load bbs while there is still pressure in the bottle.)
In the States, 1/2" sch40 PVC pipe is available that fits nicely inside the mouth of your standard soda bottle. You could build the gun around that, giving it handles and a barrel shroud.
|
|
| Back to top |
|
 |
|
|
|
| super spuder |
| Posted: 04/10/2007 18:31 PM Post subject: |
|
|
Colonel
Joined: 06 Apr 2007
Posts: 550
566.68 Spud Bux
|
kool idea. just dont take the soda bottle up past 100 psi or else you will need a new bottle and new ear drums  (soda bottles blow up at 120-130 psi)(and they are very loud)  
|
|
| Back to top |
|
|
| Scope |
| Posted: 04/10/2007 19:41 PM Post subject: |
|
|
Captain
Joined: 17 Nov 2006
Posts: 349
365.02 Spud Bux
|
2 litter soda bottles are ok at 100 psi...
i suspect smaller ones would be even better actualy
nice ideas
|
|
| Back to top |
|
|
| Solo |
| Posted: 04/11/2007 8:06 AM Post subject: |
|
|
Private First Class
Joined: 05 Jan 2007
Posts: 33
141.55 Spud Bux
|
Thanks!
Yeah, I blew up a bottle one time. Well, it broke where I had the schrader stuck through the bottom of the bottle, and I thought I'd blown myself up, but then I was like "whoah, I'm still in one piece, how did that happen?"
|
|
| Back to top |
|
|
| FeLeX |
| Posted: 04/11/2007 8:25 AM Post subject: |
|
|
Captain
Joined: 10 Mar 2007
Posts: 304
251.78 Spud Bux
|
| Hey man sorry to bother you but could you draw up a diagram for that its kinda hard for me to understand.
|
|
| Back to top |
|
|
| Solo |
| Posted: 04/11/2007 13:04 PM Post subject: |
|
|
Private First Class
Joined: 05 Jan 2007
Posts: 33
141.55 Spud Bux
|
It's really quite simple. I drew up the basic thing w/o the 1/2" PVC housing I actually would probably use if I built it. Let's see if this works:
Edit: hooray, it does! It's kinda grainy, though, but I guess that ought to do.
|
|
| Back to top |
|
|
| paaiyan |
| Posted: 04/11/2007 13:30 PM Post subject: |
|
|
Ascendant Defenestrator
Joined: 27 Dec 2006
Posts: 2055
2622.52 Spud Bux
|
What's to keep the bb's from coming out that air hole? And I'd think the compresed gas would most likely escape from the same hole and rob power from the bb's.
EDIT: It also appears that you would really ned to line that ball valve up perfectly and quickly in order for them to pass through. That might be difficult.
|
|
| Back to top |
|
|
| zeigs spud |
| Posted: 04/11/2007 14:55 PM Post subject: |
|
|
Colonel
Joined: 04 Apr 2006
Posts: 642
730.16 Spud Bux
|
| Solo wrote: | It's really quite simple. I drew up the basic thing w/o the 1/2" PVC housing I actually would probably use if I built it. Let's see if this works:
Edit: hooray, it does! It's kinda grainy, though, but I guess that ought to do. |
yea nothing keeps bb's from going out back or through air hole, which is useless and acualy would be bad for performance if you were to put bb's behind it.
|
|
| Back to top |
|
|
| super spuder |
| Posted: 04/11/2007 14:58 PM Post subject: |
|
|
Colonel
Joined: 06 Apr 2007
Posts: 550
566.68 Spud Bux
|
or you could put a couple of small air holes behind the all of the bbs and then when you open the ball valve all the bbs come flying out at once like a shot gun  that would be cool
|
|
| Back to top |
|
|
| paaiyan |
| Posted: 04/11/2007 15:16 PM Post subject: |
|
|
Ascendant Defenestrator
Joined: 27 Dec 2006
Posts: 2055
2622.52 Spud Bux
|
Or you could just leave a hole in the back of that tube. Put two tiny holes through it at the back and thread a thin piece of wire through and tie it to itself. This would prevent the bb's from exiting the back of the tube and allow for maximum airflow. That still doesnt solve the ball valve problem though.
| Description: |
|
| Filesize: |
15.55 KB |
| Viewed: |
335 Time(s) |
|
|
|
| Back to top |
|
|
| Scope |
| Posted: 04/11/2007 15:59 PM Post subject: |
|
|
Captain
Joined: 17 Nov 2006
Posts: 349
365.02 Spud Bux
|
the whole isnt big enough for the bbs to fit through.. simple enough
thats why they wont go through
|
|
| Back to top |
|
|
| paaiyan |
| Posted: 04/11/2007 16:14 PM Post subject: |
|
|
Ascendant Defenestrator
Joined: 27 Dec 2006
Posts: 2055
2622.52 Spud Bux
|
|
| Back to top |
|
|
| zeigs spud |
| Posted: 04/11/2007 16:20 PM Post subject: |
|
|
Colonel
Joined: 04 Apr 2006
Posts: 642
730.16 Spud Bux
|
| paaiyan wrote: | | Or you could just leave a hole in the back of that tube. Put two tiny holes through it at the back and thread a thin piece of wire through and tie it to itself. This would prevent the bb's from exiting the back of the tube and allow for maximum airflow. That still doesnt solve the ball valve problem though. |
yeah, lol idk why ppl thiink extra holes do anything at all to help.
|
|
| Back to top |
|
|
| paaiyan |
| Posted: 04/11/2007 16:30 PM Post subject: |
|
|
Ascendant Defenestrator
Joined: 27 Dec 2006
Posts: 2055
2622.52 Spud Bux
|
| I don't know, my thought is that hole towards the front will allow the air to escape the barrel and leave the bb's relatively unscathed.
|
|
| Back to top |
|
|
| jackssmirkingrevenge |
| Posted: 04/11/2007 23:22 PM Post subject: |
|
|
space monkey
Joined: 15 Mar 2007
Posts: 6518
9935.58 Spud Bux
|
| no need for any extra holes, just make the magazine pipe of a slightly bigger I/D (say 8mm)
|
|
| Back to top |
|
|
|
|
