my first combustion

guitarfreak · Posted: 08/27/2006 11:40 AM Post subject:

my dad and i made this gun,it took about 4-5 hours,spread over a week.the silver thing is the ramrod,it is made of a bit of aluminiumn u-channel that fits the barrel snugly.

i had some trouble with the peizo,i was using one out of a long reach bbq lighter,so i forked out $5 for a second-hand ignitor out of a gas heater. it is hooked up to a spark plug with the outside curved electrode cut off,and a blob of solder on the inner electrode. it seems to work first or second click.

the body is made completely out of metal; the barrel is stainless and about 13" long. the combustion chamber is a bit of water pipe about 11" long,with an inner thread in the end where a threaded bung is screwed in.

i covered the whole gun in black insulation tape;it looks cool and stops me getting so many shocks. the domed thing is a deodorant bottle lid taped over the spark plug,again to stop the electricity.it makes a sort of hollow,WHOOMPH sound,not like the CRACK i expected. i have only tried it in my backyard,and i live in town,so im not sure on how far the spud would go,although im guessing about 100 meteres. i use lynx deodorant as a fuel.it seems to work good. i might upgrade to a camera flash ignition sometime,ill see what the peizo's like first.