| Author |
Message
|
| shud_b_rite |
 Posted: 02/26/2007 2:34 AM Post subject: Optom mini shot |
 |
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
This is my first cannon I have posted on this website, I thought that after asking so many questions on this website I should actually post something useful. So I present you with Optom mini shot (well hey ya gotta call it something)
This is incredibly simple, it is made using:
Shrader valve
Air compressor tire inflater with gauge
60 bar rated pressure hose
Air compressor male and female quick connect fittings.
2 hose clamps
The barrel is from a $11 weed sprayer (thanks to MrCrowley for the idea, works great)
Like I said it is incredibly simple. The blue hose acts as a small chamber which can be filled to 70psi with 5 pumps using a foot pump or simply connect it to an air compressor. I am pleased with the performance of the tire inflater, the gauge on it is very accurate, it is rated to 12bar and has reasonable air flow. I made a poor harder breach loader using a plastic straw I got from the weed sprayer to cover the hole.
I have been shooting plastic bb's at 70psi through several layers of cardboard up close (wear eye protection) as accuracy with plastic bb's isn't to great. I will get some ball bearings or steel pellets and try them out. I also hope to get a 220psi 12v compressor to take it to the next level because my crappy foot pump says it can pump to 125psi but I cant get any higher than 72.
But yea anyways, I reckon its not too bad for what its worth (about $20 and still have leftover parts). Once I figured out how I was gonna do it it took me about 10mins to put together.
| Description: |
|
| Filesize: |
270.66 KB |
| Viewed: |
60 Time(s) |
|
| Description: |
| The stuff that makes it tick |
|
| Filesize: |
235.17 KB |
| Viewed: |
46 Time(s) |
|
| Description: |
| My poor harder breach loader |
|
| Filesize: |
185.94 KB |
| Viewed: |
53 Time(s) |
|
Last edited by shud_b_rite on 02/27/2007 22:58 PM; edited 1 time in total |
|
| Back to top |
|
 |
|
|
|
| experament-u2 |
| Posted: 02/26/2007 3:25 AM Post subject: |
|
|
Lieutenant Colonel
Joined: 26 Dec 2006
Posts: 477
602.69 Spud Bux
|
it looks awsome anychance of damage pics
i to have used the neck of a weed sprayer for a barrel
|
|
| Back to top |
|
|
| shud_b_rite |
| Posted: 02/26/2007 3:35 AM Post subject: |
|
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
| Yea I'll do some 2moro and I'll see if i can get some steel pellets too.
|
|
| Back to top |
|
|
| Mr.Russ |
| Posted: 02/26/2007 5:36 AM Post subject: |
|
|
Lieutenant Colonel
Joined: 26 Jan 2007
Posts: 429
459.48 Spud Bux
|
the trigger looks a bit weird...
but other then that good gun!
ever thought about mounting like a mini pump on the side of it?
|
|
| Back to top |
|
|
| Hotwired |
| Posted: 02/26/2007 5:41 AM Post subject: |
|
|
UK Spudgunner
Joined: 13 Oct 2006
Posts: 1693
3582.33 Spud Bux
|
Definitely a new design 
Why didn't you mount the barrel and hose the other way round? The trigger would then pull back instead of upwards.
|
|
| Back to top |
|
|
| shud_b_rite |
| Posted: 02/26/2007 13:44 PM Post subject: |
|
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
| If i did that then the gauge would be useless, it only measures pressure using the setup that I have. Anyway I have actually thought about buying a 300psi shock pump which should work very well because it is a very small chamber. But until now I will just keep the chamber in a coil
|
|
| Back to top |
|
|
| iknowmy3tables |
| Posted: 02/26/2007 15:03 PM Post subject: |
|
|
Brigadier General
Joined: 15 Dec 2006
Posts: 1126
2659.19 Spud Bux
|
watch out for those cheapo 12v compersers that claim to have 220psi or so, I bought one for $9 and the thing breaks before it even reaches 60psi or so, but this was for a larger gun but it might work for this gun, since the chamber takes so short to fill,
if you get one you will have to wait like 10-15 friggin minutes between uses too let it cool its getto chinese engineered @$$, and you cant let run or remain conected for more than 2mins or somthing, a good one will probably cost you twice as much
|
|
| Back to top |
|
|
| shud_b_rite |
| Posted: 02/27/2007 0:44 AM Post subject: |
|
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
| My crappy foot pump has just crapped out on me so those damage pics will have to wait a week or 2 until I get a new pump. Its not that much of a disappointment though, shooting through 2 layers of cardboard with plastic bb's isn't that great.
|
|
| Back to top |
|
|
| subterranean |
| Posted: 03/07/2007 23:29 PM Post subject: |
|
|
Master Sergeant
Joined: 21 Oct 2006
Posts: 166
391.35 Spud Bux
|
| i like the gun. i really want to make a breach loading system like yours for my next bbgun. what type of tube is the barrel and the sleeve and does this method work well?
|
|
| Back to top |
|
|
| shud_b_rite |
| Posted: 03/08/2007 13:50 PM Post subject: |
|
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
The barrel is aluminum i think, about 6.5 mm from a weed sprayer. What you cant see in the photo is the blu-tak that is used to seal around the barrel and the tire inflater. The gun works reasonably well, would work even better with metal bb's.
And also the tire inflator I used is meant for 90psi but it is rated up to 100psi. So when I pump it up to 100psi it leaks down to 90psi which is kind of stink.
The breech loader is nothing special, just a hole covered by a plastic straw. I made it thinking that I could build some kind of magazine to hold the bb's and turn it into an automatic.
If your gonna build a gun like this I would use a slightly larger chamber (not longer, larger) , and instead of using a dust gun or tire inflater, buy one of those super powerful sand blasters to use as a trigger or a sprinkler valve. While making this gun I discovered that it is important to have a fast opening time because even a small amount of air will push a bb straight out of the barrel.
|
|
| Back to top |
|
|
| subterranean |
| Posted: 03/08/2007 15:41 PM Post subject: |
|
|
Master Sergeant
Joined: 21 Oct 2006
Posts: 166
391.35 Spud Bux
|
| Are you saying that the barrel is not threaded onto the tire inflator? is it just glued?
|
|
| Back to top |
|
|
| zeigs spud |
| Posted: 03/08/2007 17:07 PM Post subject: |
|
|
Colonel
Joined: 04 Apr 2006
Posts: 642
730.16 Spud Bux
|
no. the i is connected to a male thread and the male thread connects into the tire inflator from what i can see. i sugest a hopper next time u make one. it makes much more rapid fire and has a great spouting sound that all love to hear lol. 
|
|
| Back to top |
|
|
| subterranean |
| Posted: 03/08/2007 17:09 PM Post subject: |
|
|
Master Sergeant
Joined: 21 Oct 2006
Posts: 166
391.35 Spud Bux
|
| does any one have any good methods of holding airsoft bbs in the barrel.
|
|
| Back to top |
|
|
| zeigs spud |
| Posted: 03/08/2007 17:19 PM Post subject: |
|
|
Colonel
Joined: 04 Apr 2006
Posts: 642
730.16 Spud Bux
|
heres an idea...i liek the second better
you have to click on it for the whole thing or it will be chicken scratch lol
|
|
| Back to top |
|
|
| shud_b_rite |
| Posted: 03/08/2007 21:44 PM Post subject: |
|
|
1st Lieutenant
Joined: 30 Jan 2007
Posts: 291
510.07 Spud Bux
|
| Zeigs spud is right. The chamber has a quick connect for an aircompressor that fits into the tire inflater. And the barrel fits firmly into the hole on the tire inflator and just has a bit of blu-tak to seal it.
|
|
| Back to top |
|
|
|
|
