This homemade gun shoots 0.12gram bb balls at around 280miles/h. (450km/h) It works on a 1.5 liter coke bottle at 5bar operating pressure. It can shoot about 40 times on this bottle. It also has a gravity fed magazine. I also have a system to make sure that the balls dont roll out of the barrel and that there are no double feeds. At the moment I am working on a automatic airsoft gun which recocks on the pressure of the bottle as well; just like an uzi. So inother words this gun still needs to be recocked manually.
Plz respond to this gun as I am eager to hear from ya! If I get enough reactions I will post the plan to this airsoftgun.
NEW Internals Video/assembly:
materails used on this gun:
*8mm aluminium pipe (6mm on the inside>barrel)
*10mm aluminium pipe (8mm on the inside)
*12mm copperpipe (10mm on the inside)
*screw with a head about 9 mm in diameter
*spring from a soappump (about 50mm long)>the stronger it is the smaller ur dwell time is
*solder equipment and solder
*10mm and 8mm drill
*90 degrees solder corners (2x)
*1-2mm thickness nail (2x)
*spring or elastic band to pull the barrel back
*for the trigger I would first try to use a simple trigger for testing purpuses
*o-ring (about 10.5-11 mm in diameter>too big for the copperpipe, so u have to really push it in like u c on my video
New idea for an automatic airgun which works on a similar principle:
(picture made by nsane)
//http://www.spudfiles.com/thumb_upload/pics/HPIM7617.jpg
airgun inline.gif
Description:
How the airgun works.
Filesize:
24.26 KB
Viewed:
3210 Time(s)
HPIM0989.JPG
Description:
and right
Filesize:
230.82 KB
Viewed:
8 Time(s)
HPIM0988.JPG
Description:
left
Filesize:
210.4 KB
Viewed:
6 Time(s)
HPIM0987.JPG
Description:
Aim and FIRE
Filesize:
276.52 KB
Viewed:
6 Time(s)
HPIM0986.JPG
Description:
look from top (magazine)
Filesize:
262.22 KB
Viewed:
8 Time(s)
HPIM0985.JPG
Description:
closeup
Filesize:
206.1 KB
Viewed:
6 Time(s)
HPIM0984.JPG
Description:
otherside
Filesize:
143.76 KB
Viewed:
7 Time(s)
HPIM0983.JPG
Description:
side
Filesize:
224 KB
Viewed:
7 Time(s)
HPIM0981.JPG
Description:
closeup
Filesize:
276.97 KB
Viewed:
8 Time(s)
HPIM0977.JPG
Description:
With stock
Filesize:
157.61 KB
Viewed:
6 Time(s)
HPIM0976.JPG
Description:
Closeup
Filesize:
205.23 KB
Viewed:
7 Time(s)
HPIM0975.JPG
Description:
Without stock
Filesize:
277.42 KB
Viewed:
5 Time(s)
HPIM9607.JPG
Description:
thumb reload>in back position
Filesize:
209.59 KB
Viewed:
28 Time(s)
HPIM9608.JPG
Description:
thumb reload>in forward/reload position
Filesize:
208.07 KB
Viewed:
19 Time(s)
HPIM9606.JPG
Description:
thumb reload>side angle view
Filesize:
196.74 KB
Viewed:
25 Time(s)
HPIM9605.JPG
Description:
thumb reload>side view
Filesize:
190.1 KB
Viewed:
20 Time(s)
HPIM9604.JPG
Description:
thumb reload>another shot
Filesize:
180.37 KB
Viewed:
23 Time(s)
HPIM81434.JPG
Description:
Discription of parts
Filesize:
138.26 KB
Viewed:
267 Time(s)
HPIM8143.JPG
Description:
Filesize:
123.76 KB
Viewed:
69 Time(s)
HPIM8144.JPG
Description:
Filesize:
110.02 KB
Viewed:
63 Time(s)
HPIM8146.JPG
Description:
Filesize:
93.7 KB
Viewed:
177 Time(s)
HPIM8141.JPG
Description:
Filesize:
92.36 KB
Viewed:
113 Time(s)
HPIM8140.JPG
Description:
Filesize:
89.33 KB
Viewed:
94 Time(s)
HPIM7630small.JPG
Description:
different angle
Filesize:
111.48 KB
Viewed:
80 Time(s)
HPIM7629smal.JPG
Description:
Side view. U can c the recock system here.
Filesize:
106.44 KB
Viewed:
78 Time(s)
HPIM7624small.JPG
Description:
The air fittings to the coke bottle. I made a smaller hole in the cap then that of the tube. U push the tube in and then insert a bit bigger pip at the back of the cap. This fitting is self sealing as the higher the pressure the more force outwards>tighter fit.
Filesize:
110.68 KB
Viewed:
50 Time(s)
airgun.JPG
Description:
This is the airgun
Filesize:
105.26 KB
Viewed:
101 Time(s)
Nieuw - WinRAR archive.rar
Description:
This is what the rar file animation looks like (but then animated). This is how the gun basically works. The valv is the same like the one I used for my old airgun [img]http://www.spudfiles.com/forums/files/internals_158.jpg[/img]
A few cosmetic changes could do it justice (such as a paintjob), but it is a nice piece. Have you considered replacing the coke bottle and putting a lot more pressure into it?
Plans would be wonderful. It may have something in it that is completely innovative (which we tend to like).
thats awsome also i want to know what do are you using as the main valve it looks cool and also powerfall also i wanted to know did u made yourself the body??? good job good luck with the full auto project
This type of gun is a barrel bolt type of gun. So the loading hole is open when it is cocked. When the trigger is pulled the loading hole closes bc the barrel moves backwards. When the barrel is totally backwards it hits the valve and gives some highpressure air. Like this the airgun is really efficient and shoots at high velocity. I will post a pic of the mechism later.
Looks are a bit too ghetto for my tastes, but it's clearly more sophisticated than that inside - I'd like to know more.
Some tips for the video:
-Never say "The Best *****" for a couple of reasons:
- It almost certainly isn't, there have been a lot of different projects.
- It sounds pretty bigheaded
- It will annoy other people, because you've come along and just trashed their cannons without even looking at them.
- Don't put white text over a flash photo, it makes it very hard to read.
- If you want text that isn't over a photo, insert an all black picture as a background rather than the horrible default blue Windows movie maker uses.
I know I havent spent too much time on making the movie. I will make a better one soon. Further, I didnt say it was the best of all. It is the best one I made since a while. I have been working on these airguns for the past 5 years. But I finally found the place where to share thoughts about ehm. I think I have revolutionary ideas for these guns, as I havent seen any like ehm before. SO I will make more pictures soon of all the internals. So yeah I didnt want u guys to feel disgusted by my work>ragnarok.
yeah I made the wooden body by myself. The design was taken from the internet from a rubberband shooting gun. Its like a sandwich from wood with the internals inside.
im guessing that you were going for a AK-47 design? it sounds like you have a pretty sophisticated semi-auto shooting system and a nice paint job would be nice.
You cannot post new topics in this forum You cannot reply to topics in this forum You cannot edit your posts in this forum You cannot delete your posts in this forum You cannot vote in polls in this forum You cannot attach files in this forum You can download files in this forum
