| Author |
Message
|
| Angel-FR |
 Posted: 11/23/2006 13:48 PM Post subject: Performances Problems (probably an oversized chamber...) |
 |
|
Private
Joined: 23 Nov 2006
Posts: 17
46.12 Spud Bux
|
|
| Back to top |
|
 |
|
|
|
| pimpmann22 |
| Posted: 11/23/2006 14:48 PM Post subject: |
|
|
Donating Moderator
Joined: 18 Feb 2005
Posts: 1605
4961.78 Spud Bux
|
| If at all possible id advise you chop 1/2 to 2/3 of your chamer and replace with a female adapter and cap, or whatever device you have to access the chamber. Also add some barrel length, total of 5-6 feet in length. You got several things you have to balance out, I mean your total length cant be to long as to remain portable. So id suggest you find a comfortable length that will work for you, then figure out a ~1:1 ratio for the gun. Yea the chamber on the gun pictured is WAY to big. Any more questions be sure to ask.
|
|
| Back to top |
|
|
| SpudStuff |
| Posted: 11/23/2006 15:39 PM Post subject: |
|
|
Major General
Joined: 10 Dec 2005
Posts: 1379
128.17 Spud Bux
|
| Woa. The problem is you are using hairspray! You should switch to something better. Like oh say Stating Fluid! For a chamber that big you need maby 2-3 seconds. And a chamber fan would help ALOT. If mixes the fuel and vents the chamber when you are done with the shot.
|
|
| Back to top |
|
|
| Angel-FR |
| Posted: 11/23/2006 15:51 PM Post subject: |
|
|
Private
Joined: 23 Nov 2006
Posts: 17
46.12 Spud Bux
|
| pimpmann22 wrote: | | If at all possible id advise you chop 1/2 to 2/3 of your chamer and replace with a female adapter and cap, or whatever device you have to access the chamber. Also add some barrel length, total of 5-6 feet in length. You got several things you have to balance out, I mean your total length cant be to long as to remain portable. So id suggest you find a comfortable length that will work for you, then figure out a ~1:1 ratio for the gun. Yea the chamber on the gun pictured is WAY to big. Any more questions be sure to ask. |
OK thanks for your help , so if i shorten the chamber to reach about 30 cm , so i will get a ratio of 2:1 that would be good or i should try 15 cm for a ratio of 1:1 ,what's the best to have good performances ?
that will be a very very little chamber , it's going to be hard to put the good amount of gaz in it :/
|
|
| Back to top |
|
|
|
|
