| Author |
Message
|
| Spooky |
 Posted: 08/23/2009 5:30 AM Post subject: |
 |
|
Private
Joined: 11 Aug 2009
Posts: 13
63.45 Spud Bux
|
I'm working on a coaxial at the moment, just successfully cast my epoxy piston.
The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.
Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.
Do I have any other options?
|
|
| Back to top |
|
 |
|
|
|
| FORE!!!! |
| Posted: 08/23/2009 6:15 AM Post subject: |
|
|
1st Lieutenant
Joined: 06 Jul 2009
Posts: 280
390.38 Spud Bux
|
| Spooky wrote: | I'm working on a coaxial at the moment, just successfully cast my epoxy piston.
The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.
Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.
Do I have any other options? |
something like this maybe==  click to enlarge..
| Description: |
|
| Filesize: |
45.93 KB |
| Viewed: |
207 Time(s) |
|
Last edited by FORE!!!! on 08/23/2009 18:35 PM; edited 1 time in total |
|
| Back to top |
|
|
| MrCrowley |
| Posted: 08/23/2009 13:17 PM Post subject: |
|
|
Kaleun
Joined: 23 Jun 2006
Posts: 8999
9195.37 Spud Bux
|
| Spooky wrote: | I'm working on a coaxial at the moment, just successfully cast my epoxy piston.
The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.
Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.
Do I have any other options? |
Most people use some sort of barrel support with either holes in it or only making the support take up a small cross-sectional area to support the barrel. I cut a cork in half, trimmed it a bit and glued it at the end of the barrel inside the chamber.
Some people make a circle from some rigid material and then cut out 80% of the middle, leaving only necessary supports, so air can still flow past it.
|
|
| Back to top |
|
|
| Technician1002 |
| Posted: 08/25/2009 3:05 AM Post subject: |
|
|
Senior Technician
Joined: 04 Apr 2009
Posts: 4670
15520.25 Spud Bux
|
| MrCrowley wrote: | | Spooky wrote: | I'm working on a coaxial at the moment, just successfully cast my epoxy piston.
The problem I'm having is that my copper barrel is sagging inside inside the chamber. This will obviously cause sealing problems as it wont line up correctly with the piston.
Thought about sleeving the barrel with something inside the chamber to keep it rigid but this will decrease my chamber volume too much. I also thought about a drop of epoxy between the outside of the barrel and the inside of the chamber at the piston end, but I'm worried about how this will affect airflow during firing.
Do I have any other options? |
Most people use some sort of barrel support with either holes in it or only making the support take up a small cross-sectional area to support the barrel. I cut a cork in half, trimmed it a bit and glued it at the end of the barrel inside the chamber.
Some people make a circle from some rigid material and then cut out 80% of the middle, leaving only necessary supports, so air can still flow past it. |
Because air expands, the highest velocity in the chamber is near the valve. I provide barrel supports in coaxials about 6 inches from the valve. It prevents sagging and is mostly out of the airflow path. There is no need for a support right at the area of the valve.
|
|
| Back to top |
|
|
| MrCrowley |
| Posted: 08/25/2009 3:10 AM Post subject: |
|
|
Kaleun
Joined: 23 Jun 2006
Posts: 8999
9195.37 Spud Bux
|
Good advice, never thought of that though it makes perfect sense. 
|
|
| Back to top |
|
|
| Technician1002 |
| Posted: 08/25/2009 3:54 AM Post subject: |
|
|
Senior Technician
Joined: 04 Apr 2009
Posts: 4670
15520.25 Spud Bux
|
| MrCrowley wrote: | | Good advice, never thought of that though it makes perfect sense. |
I guess a picture helps. Here is a view into the breech of the Mouse Musket. The barrel supports are back about 6 inches so they are not visiable near the breech.
|
|
| Back to top |
|
|
| pipeboyswe |
| Posted: 09/03/2009 7:41 AM Post subject: |
|
|
Specialist
Joined: 01 Sep 2009
Posts: 43
79.12 Spud Bux
|
thanks now i understand how a coax works  what is the best material for the piston body?
|
|
| Back to top |
|
|
| Willdebeers |
| Posted: 09/03/2009 8:16 AM Post subject: |
|
|
2nd Lieutenant
Joined: 03 Feb 2009
Posts: 225
47.96 Spud Bux
|
| Whatever you can get hold of. They range from baked bean cans to solid PVC.
|
|
| Back to top |
|
|
| qwerty |
| Posted: 09/03/2009 9:25 AM Post subject: |
|
|
Colonel
Joined: 12 Apr 2009
Posts: 628
520.78 Spud Bux
|
| It depends what you have access to if you have a machine shop you could make a solid nylon piston or if you dont have any machinery you could make one out of hot glue or epoxy. I made mine out of some random toy car wheel so you can use almost anything cylindrical shape.
|
|
| Back to top |
|
|
| Brian the brain |
| Posted: 09/03/2009 9:36 AM Post subject: |
|
|
Dutch Spud Clan Leader
Joined: 05 Dec 2005
Posts: 2763
6458.86 Spud Bux
|
| A bolt and washers works well..
|
|
| Back to top |
|
|
| toogers |
| Posted: 10/24/2009 16:38 PM Post subject: |
|
|
Private First Class
Joined: 24 Oct 2009
Posts: 36
54.06 Spud Bux
|
| I'm wondering, instead of the air compressor pressure pushing the piston forward, can i put a spring behind the piston, because i don't have access to an air compressor. my idea is that opening the pilot would create vacuum pulling the piston back letting the pressure in the chamber go through the barrel.
|
|
| Back to top |
|
|
| MrCrowley |
| Posted: 10/24/2009 16:42 PM Post subject: |
|
|
Kaleun
Joined: 23 Jun 2006
Posts: 8999
9195.37 Spud Bux
|
| toogers wrote: | | I'm wondering, instead of the air compressor pressure pushing the piston forward, can i put a spring behind the piston, because i don't have access to an air compressor. my idea is that opening the pilot would create vacuum pulling the piston back letting the pressure in the chamber go through the barrel. |
Yes that should work, and by the way, the piston doesn't open because of a vacuum. I suggest you look at the drawings again. It opens because when you remove the force behind the piston, the force in front of the piston pushes it back.
|
|
| Back to top |
|
|
| bobsaget |
| Posted: 12/19/2009 11:16 AM Post subject: |
|
|
Private
Joined: 16 Dec 2009
Posts: 3
12.75 Spud Bux
|
| If i am molding a piston out of the connector that the piston will slide in, i will need to make a slight equalization hole because the piston is the same exact size as the gun itself, correct? And how large should my equalization hole be if the piston is 3/4 in wide or about two CM. I am planning on making a very small hole and making it larger untill the piston moves back. The piston should move back if i have a very small hole right, something around 2 mm?
|
|
| Back to top |
|
|
| mrsteel |
| Posted: 01/03/2010 16:58 PM Post subject: |
|
|
Private
Joined: 02 Jan 2010
Posts: 1
7.36 Spud Bux
|
im building a piston valve airgun and i want to know if the diameter of the exhaust port should be bigger or smaller than that of the barrel, whichone woold give more power to the barrel?
|
|
| Back to top |
|
|
| c11man |
| Posted: 01/03/2010 17:03 PM Post subject: |
|
|
Brigadier General
Joined: 06 Feb 2009
Posts: 838
1595.00 Spud Bux
|
i assume you mean the porting size by exhaust port and it should be the same or larger than the barrel for more power. in no way do you need to make it larger but i generly gives more airflow resulting in more projectile velocity. also you will be supprised by the power of a piston valve
edit: ok now i know what you were talking about
Last edited by c11man on 01/03/2010 17:30 PM; edited 1 time in total |
|
| Back to top |
|
|
|
|
