| Author |
Message
|
| brian Casey |
 Posted: 10/26/2006 17:08 PM Post subject: remote ignition |
 |
|
Private First Class
Joined: 14 Sep 2006
Posts: 26
79.62 Spud Bux
|
| i have a couple questions on how to run a remote ignition system. I have one of those electronic whoopie cushions. i am not sure how to wire this for a camera flash+ignition coilsetup if anyone knows how to do this that would be great! |
|
| Back to top |
|
 |
|
|
|
| GalFisk |
| Posted: 10/27/2006 2:55 AM Post subject: |
|
|
Corporal
Joined: 28 Feb 2005
Posts: 77
276.52 Spud Bux
|
Rig the circuit so that it gives a voltage (pretty much any positive voltage) out when activated. Connect the ignition coil in series with the flash tube, keeping the rest of the camera flash circuit intact.
Get a thyristor (SCR) which can take 400 volts, and connect the anode and cathode across the trigger switch on the camera flash (anode to +, cathode to -, either measure the voltage to find the polarity, or trace the connections to the main cap).
Connect the output from the cushion to the gate of the thyristor, and the ground of the circuit to the cathode.
Now, every time the circuit gives off a voltage, it will trigger the thyristor, which triggers the ignition of the flash tube, which then dumps all the voltage across the ignition coil, producing a spark.
The cushion and flash circuits need to be completely separate except for the connection through the thyristor, and both have to use their own batteries. There is a possibility of high voltages between any point in the two circuits (I found out this the hard way in a different setup), so keep them well insulated. |
|
| Back to top |
|
|
| Recruit |
| Posted: 10/27/2006 4:04 AM Post subject: |
|
|
Lieutenant Colonel
Joined: 06 Oct 2006
Posts: 415
256.60 Spud Bux
|
| Umm diagram please, because that didnt really make sense to me. |
|
| Back to top |
|
|
| singularity |
| Posted: 10/27/2006 11:58 AM Post subject: |
|
|
Brigadier General
Joined: 26 Jun 2006
Posts: 986
2467.47 Spud Bux
|
i have made a very getto'ed remote detenator, it would take to long to explain so ill draw a pic
an scr is an electronic switch, i used the leads from the r/c cars motor as the trigger it. the switch was wired up to the the camera flashes capacitor so when it hit the foward button on the r/c car it turned on the scr dumping the capacitor creating a spark |
|
| Back to top |
|
|
| Recruit |
| Posted: 10/27/2006 12:50 PM Post subject: |
|
|
Lieutenant Colonel
Joined: 06 Oct 2006
Posts: 415
256.60 Spud Bux
|
| Ok now that makes sense, thank you. |
|
| Back to top |
|
|
|
|
