STAND

Provided By - Ian2accurate

This is a stand for a cannon, which is able to rotate and move up and down about 120*(degrees sign). The 1" pipe you see running through the cross makes sure the air does not fill the <br>
stand before getting to the projectile. The cross was bored out with a dremel tool, and the pipe was sanded a little to make it go through.

The pipe that 90*'s off on the bottom of the inserted piping leads to 2 tees which are 2 valves for the cannon. It is possible to make a more complex design of this one, which could have supports using 45*'s and such





Provided By - Ian2accurate