Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 42 users online :: 4 registered, 0 hidden and 38 guests


Most users ever online was 218 on Wed Dec 07, 2016 6:58 pm

Registered users: Bing [Bot], Exabot [Bot], Google [Bot], Yahoo [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

Electrical wiring

All non-spudgun related discussion goes here such as projects, theories, serious questions, etc. All "off-topic" posts (aka useless posting, determined by moderators) will be removed.
Sponsored 
  • Author
    Message

Unread postAuthor: LikimysCrotchus5 » Sun Oct 19, 2008 8:51 pm

daxspudder wrote:@i-will, likely 12-24v

I am pretty sure that will work... if not, connect the ACC directly to the circuit board, and the ground and circuit board to the negative terminal... ill give you a pic of how i have my led switch for my chamber fan set up, it works on the same principal...


I have a question to this, can i do this and would it still work?
  • 0

Attachments
SWITCH2.JPG
SWITCH2.JPG (15.69 KiB) Viewed 293 times
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
LikimysCrotchus5
Brigadier General
Brigadier General
 
Posts: 1100
Joined: Tue Sep 04, 2007 10:16 pm
Reputation: 0

Unread postAuthor: LikimysCrotchus5 » Sun Oct 19, 2008 8:52 pm

daxspudder wrote:@i-will, likely 12-24v

I am pretty sure that will work... if not, connect the ACC directly to the circuit board, and the ground and circuit board to the negative terminal... ill give you a pic of how i have my led switch for my chamber fan set up, it works on the same principal...


I have a question to this, can i do this and would it still work?

EDIT: Damn the refresh button!
  • 0

Attachments
SWITCH2.JPG
SWITCH2.JPG (15.69 KiB) Viewed 293 times
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
LikimysCrotchus5
Brigadier General
Brigadier General
 
Posts: 1100
Joined: Tue Sep 04, 2007 10:16 pm
Reputation: 0

Unread postAuthor: daxspudder » Thu Oct 23, 2008 5:12 pm

yes, wire from the switch to the loads ground to the battery ground... or just like it is in my drawing...

as to this topics other preponderances you can place the accessory in line with the LED, via, batt+ to POW to GRD to ACC+/ACC- to batt-(where acc is the accessory not the output on the switch... but when you do it that way you reduce your current slightly due to the mild resistance of the LED, the way in my drawing is the intended wiring for the type of switch you used see here for my use of this type of switch...
  • 0

"<I>For dare to be peace, I have to keep at it everyday, da Man doesn't take days off so neither can I</I>" -<B>Bob Marley</B>, day before a performance, a day after being shot in the chest. "<I>If you are the big, big tree, we are the small axe, ready to cut you down!</I>" -Bob again :brave:
User avatar
daxspudder
Captain
Captain
 
Posts: 300
Joined: Thu Apr 24, 2008 10:22 pm
Reputation: 0

Unread postAuthor: LikimysCrotchus5 » Thu Oct 30, 2008 7:08 pm

Ok i got a slight problem.

I got another tazer (a mini talon) and i ripped it apart so i would just have the guts of the circuit. I then soldered the connections as shown in the diagram above, but i didnt get my desired result.

What i did was put a momentary switch in between the positive wires so that i can press that to create a spark. Well, what i want the LED switch to do is to just light up when i flip the switch, so that i know the circuit is on. But it only lights up when i press the momentary switch, and it creates a spark as well. So how can i make it so that when i flip the LED switch, it will light up, and when i press the momentary switch, it will create a spark?
  • 0

4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
LikimysCrotchus5
Brigadier General
Brigadier General
 
Posts: 1100
Joined: Tue Sep 04, 2007 10:16 pm
Reputation: 0

Unread postAuthor: rp181 » Thu Oct 30, 2008 8:55 pm

put them is series.
  • 0

User avatar
rp181
Brigadier General
Brigadier General
 
Posts: 1090
Joined: Thu Dec 13, 2007 8:47 pm
Reputation: 0

Unread postAuthor: LikimysCrotchus5 » Thu Oct 30, 2008 10:22 pm

O duh!

Man, can i be stupid sometimes.

Thx.
  • 0

4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
User avatar
LikimysCrotchus5
Brigadier General
Brigadier General
 
Posts: 1100
Joined: Tue Sep 04, 2007 10:16 pm
Reputation: 0

Previous

Return to Non-Spudgun Related Discussion

Who is online

Registered users: Bing [Bot], Exabot [Bot], Google [Bot], Yahoo [Bot]

Reputation System ©'