jhalek90 wrote:I approve of this cannon. it would look SICK painted flat green.
Normally i'm not a fan of electrically actuated sprinkler valve... but i LOVE the trigger that you have.
Just to point out... It looks like ALL the fitting are DWV. (except the front bushing.)
I would advise on your next build, yo make sure you get pressure rated fittings... they have a much deeper socket. the couplers are about 2x as long.
I personally, WOULD shoot this at 50psi.... but if you ever hear even a tiny leak from any of the fittings... set it down very carefully and GET the #%@& away from it.
when you build your next one, use pressure rated fitting, and crank her up to 150 psi. (also, use a 1.5'' chamber with a 1/2 barrel... 2'' is nice, but overkill. you would notice very little performance decrease.)
ya i recently did some math and realized that the B:C ratio is like 8 to 1 lol. Ill be replacing her barrel next summer and It still has some good power even at 50 psi. And are u sure ALL the fittings are DWV?