Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 71 users online :: 5 registered, 0 hidden and 66 guests


Most users ever online was 155 on Mon Aug 15, 2016 1:40 am

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

Spring Pistol Trigger Issue

Post questions and info about pneumatic (compressed gas) powered cannons here. This includes discussion about valves, pipe types, compressors, alternate gas setups, and anything else relevant.
Sponsored 
  • Author
    Message

Unread postAuthor: McCoytheGreater » Thu Dec 31, 2009 2:07 am

Check this pic out. I'm sure you've seen a configuration like this before. I don't know how much time and "playing with" you want to put into this, but here might be a solution to your trigger/sear problem. In the Tippmann 98 Custom, when the bolt is pulled back, it pushes the sear onto a trigger platform (we'll just call it that for now). When the trigger is pulled, the platform is pushed up pushing the sear down and releasing the hammer. As I said, if you have the time/patience for this, it seems to be a descent solution, and you won't need as strong of a trigger spring.
  • 0

Attachments
ResponseTriggerSystem98.jpg
Don't pay attention to the silver barrel thing. That's a custom part for the gun.
ResponseTriggerSystem98.jpg (20.2 KiB) Viewed 339 times
User avatar
McCoytheGreater
Sergeant Major
Sergeant Major
 
Posts: 191
Joined: Tue Dec 15, 2009 1:10 am
Location: Mississippi State
Reputation: 0

Unread postAuthor: qwerty » Thu Dec 31, 2009 4:46 am

It still fires a 6mm saboted BB around 50 foot.


50 foot isn't much at all. You should go back to the old, more powerful spring and fiddle with it until you get it working.
  • 0

I visit occasionally to make unrelated posts.
User avatar
qwerty
Colonel
Colonel
 
Posts: 677
Joined: Sun Apr 12, 2009 2:16 am
Location: Evesham, Worcs
Country: United Kingdom (uk)
Reputation: 0

Unread postAuthor: skinner » Fri Jan 01, 2010 8:19 pm

I've thought of a few things that may get the gun working. I need to wait until I get back to work so I can use the lathe.

I know that 50 feet isnt alot, but that distance is considering that the rubber bands only provide 1/4 the power of the spring, And at the moment whilst im not working and dont have access to a lathe, It'll have to do. Im sure once I get on the lathe and do what I was going to do, I know it will work and hopefully fire a BB 300 foot, That's my aim, so we'll see how things go.

I may have to look at a 2 stage trigger with a retaining pin so the catch face locks onto the sear. I will look into that when all my other plans fail.

Cheers
Skinner
  • 0

Air-Nihilation .24cal - Fully Machined Awesomeness.
User avatar
skinner
Corporal
Corporal
 
Posts: 78
Joined: Sun Dec 24, 2006 2:56 am
Location: Australia
Reputation: 0

Previous

Return to Pneumatic Cannon Discussion

Who is online

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot]

Reputation System ©'