Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 104 users online :: 3 registered, 0 hidden and 101 guests


Most users ever online was 253 on Tue Nov 19, 2019 6:28 pm

Registered users: Bing [Bot], Google [Bot], MSN [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

A look inside the "bleacher reacher" t-shirt launcher

Post questions and info about pneumatic (compressed gas) powered cannons here. This includes discussion about valves, pipe types, compressors, alternate gas setups, and anything else relevant.
Sponsored 
  • Author
    Message

A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Wed Nov 11, 2015 11:57 am

I had a bunch of these to service and though I'd share a look inside:

tsg1.jpg


tsg2.jpg


tsg3.jpg


tsg4.jpg


Standard exhaust valve setup but with an interesting configuration that has the piston seal at the front endcap but avoids using a spool or "toolie" type valve. There's no rubber seal on the piston face, it's aluminum on delrin, and it has a floating o-ring to allow air to be filled from the main tank but not to flow back when the pilot is actuated.

Operating in the 300-500 psi range, these things are pretty darn loud!

Also did I mention my workshop has an epoxy floor :D
  • 1

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: wyz2285 » Wed Nov 11, 2015 1:22 pm

T-shirt cannon right? I think I have seem something similar somewhere.
Interesting piston setup, any chance of a video (launching something more interesting rather than T-shirts :D)?
  • 0

CpTn_lAw wrote::D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
wyz2285
Major General
Major General
 
Posts: 2376
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Country: Portugal (pt)
Reputation: 25

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Wed Nov 11, 2015 10:21 pm

wyz2285 wrote:T-shirt cannon right?


I guess the post title of "t-shirt launcher" wasn't clear enough :P

nteresting piston setup, any chance of a video (launching something more interesting rather than T-shirts :D)?


perhaps ;)
  • 0

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: wyz2285 » Thu Nov 12, 2015 10:22 am

Ah the "T-shirt" parts got omitted when I saw it on the recent post section, my bad, :lol:
Still trying to remember where i have seem them, pretty pricey stuff too if I'm not mistaken.
  • 0

CpTn_lAw wrote::D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
wyz2285
Major General
Major General
 
Posts: 2376
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Country: Portugal (pt)
Reputation: 25

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Thu Nov 12, 2015 11:03 am

Manufaturer's page, pretty pricey indeed!

Here's a quick video accelerating an empty soda can at 300 psi:

  • 0

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: wyz2285 » Thu Nov 12, 2015 4:15 pm

Reminds me of this :D
  • 0

CpTn_lAw wrote::D "yay, me wanna make big multishot pnoob with 1000 psi foot pump compressor using diamond as main material. Do you think wet bread make good sealant? " :D
User avatar
wyz2285
Major General
Major General
 
Posts: 2376
Joined: Sat Mar 06, 2010 7:50 am
Location: Porto, Portugal
Country: Portugal (pt)
Reputation: 25

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Fri Sep 13, 2019 8:07 am

Another round of servicing, another chance to have a little fun with compressed air :D

  • 1

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Sponsored

Sponsor
 


Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: Moonbogg » Fri Sep 13, 2019 9:05 am

What does the chamber look like on these things? I suppose you might get in trouble for uploading a paint drawing of how this thing works?
  • 0

User avatar
Moonbogg
Major General
Major General
 
Posts: 1526
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Country: United States (us)
Reputation: 54

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Fri Sep 13, 2019 9:40 am

Moonbogg wrote:What does the chamber look like on these things?


You should be able to tell from the photos but here is a simplified diagram of the internals:

Image

Green arrow shows where the air is filled from, this is then closed off and another valve is opened at the red arrow to empty the pilot volume and fire the launcher.

The piston has a floating o-ring that allows air to flow from the pilot chamber to the main chamber, but not the other way round.
  • 0

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: Moonbogg » Fri Sep 13, 2019 5:02 pm

Thanks for showing that. That's a really great design. I love the short piston travel and front-mounted configuration of the piston housing because that preserves chamber volume. I tried to design my last cannon that way years ago when I first started thinking about a piston hybrid design, but I couldn't find a way to vent a low volume, front-mounted housing like that in a way that i was happy with, but it makes perfect sense for a pneumatic.
No bumpers and up to 500psi? Looks like Delrin is a legit piston material. How does the piston hold up? What needed to be serviced in the cannons?
  • 0

User avatar
Moonbogg
Major General
Major General
 
Posts: 1526
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Country: United States (us)
Reputation: 54

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Sat Sep 14, 2019 7:29 am

Moonbogg wrote:No bumpers and up to 500psi? Looks like Delrin is a legit piston material. How does the piston hold up?


The piston is actually aluminum, as is the housing, and with no bumpers to speak of there is no visible wear.

What needed to be serviced in the cannons?


Mostly leaky threaded connections, and a good cleaning inside because they are used for firing confetti as well and aren't always pressurized before the confetti is loaded up, so some of it gets in the chamber. If it gets between the piston and seat, this causes leaks.
  • 0

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: Moonbogg » Sat Sep 14, 2019 1:40 pm

Aluminum piston? Maybe there is a dashpot/air cushion effect preventing a hard slam. That's interesting. And a metal to metal seal. That's also interesting. Those are two things I would never consider to try, yet they work.
  • 0

User avatar
Moonbogg
Major General
Major General
 
Posts: 1526
Joined: Mon Oct 13, 2008 10:20 pm
Location: SoCal
Country: United States (us)
Reputation: 54

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: jackssmirkingrevenge » Mon Sep 16, 2019 9:23 am

There's no real design for cushioning the impact, it seems to me that it simply travels a short distance that isn't sufficient to cause any damage.

a metal to metal seal


The piston seats against delrin, the while component in this image. At these pressures I don't think metal on metal would work.
  • 0

hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
jackssmirkingrevenge
Donating Member
Donating Member
 
Posts: 25598
Joined: Thu Mar 15, 2007 11:28 pm
Country: Chad (td)
Reputation: 333

Re: A look inside the "bleacher reacher" t-shirt launcher

Unread postAuthor: Brian the brain » Tue Oct 15, 2019 3:23 am

Basically a coax with the reservoir pointed in the opposite direction...I like it!
  • 0

Gun Freak wrote:
Oh my friggin god stop being so awesome, that thing is pure kick ass. Most innovative and creative pneumatic that the files have ever come by!

Can't ask for a better compliment!!
User avatar
Brian the brain
Moderator
Moderator
 
Posts: 3522
Joined: Mon Dec 05, 2005 2:06 am
Location: Holland
Country: Netherlands (nl)
Reputation: 65

Return to Pneumatic Cannon Discussion

Who is online

Registered users: Bing [Bot], Google [Bot], MSN [Bot]

Reputation System ©'