Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 87 users online :: 5 registered, 0 hidden and 82 guests


Most users ever online was 155 on Mon Aug 15, 2016 1:40 am

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

Rain Bird CP100 sounding like a air horn

Post questions and info about pneumatic (compressed gas) powered cannons here. This includes discussion about valves, pipe types, compressors, alternate gas setups, and anything else relevant.
Sponsored 
  • Author
    Message

Unread postAuthor: spudder1 » Tue Aug 15, 2006 2:55 pm

I will try that tonight, hopefully it will cure this problem.

Thanks to all people that are helping me out.
  • 0


spudder1
Private First Class
Private First Class
 
Posts: 28
Joined: Tue Aug 08, 2006 10:21 am
Reputation: 0

Unread postAuthor: spudder1 » Wed Aug 16, 2006 7:31 am

All problem fixed. When doing the sprinkler valve mod, I did not put the rod back in. Last night I put the rod back in the diaghpram and bent it and everything is working perfectly. I launch a whole spud probertly 250 yards. Lot better then my old "combustion" chamber. Just want to thank everyone that has helped me out.

Thanks.
  • 0


spudder1
Private First Class
Private First Class
 
Posts: 28
Joined: Tue Aug 08, 2006 10:21 am
Reputation: 0

Unread postAuthor: spudder1 » Thu Aug 17, 2006 12:36 pm

My problem is cured now. Dissassembled the mod'ed valve and insterted the guide rod and everything works great. No more horn sounds with me. Just want to say thanks to everyone that has helped me out on this problem.

Thanks
  • 0


spudder1
Private First Class
Private First Class
 
Posts: 28
Joined: Tue Aug 08, 2006 10:21 am
Reputation: 0

Unread postAuthor: kinko » Sat Aug 19, 2006 12:30 am

Hello,

I will let you in on my personal experience with honking.

I built a gun and ended up doing a lot of cutting. I did not clean up the shards of pvc inside the gas chamber. When I fired the gun, the shards flew into the valve. When I took the sprinkler valve, the rubber seals had pvc all over them. I cleaned them and put a little air tool oil on them and it fixed the honking. Kthxbai.
  • 0


kinko
Private
Private
 
Posts: 1
Joined: Sat Aug 19, 2006 12:27 am
Reputation: 0

Unread postAuthor: spudder1 » Mon Aug 21, 2006 8:05 am

Thanks, I fix the honking by putting the rod back in the vavle. I also had the same problem with pvc shavings as you did.

Thanks for the reply,
  • 0


spudder1
Private First Class
Private First Class
 
Posts: 28
Joined: Tue Aug 08, 2006 10:21 am
Reputation: 0

Previous

Return to Pneumatic Cannon Discussion

Who is online

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot]

Reputation System ©'