Login    Register
User Information
We are a free and open
community, all are welcome.
Click here to Register
Who is online

In total there are 62 users online :: 3 registered, 0 hidden and 59 guests

Most users ever online was 218 on Wed Dec 07, 2016 6:58 pm

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot] based on users active over the past 5 minutes

The Team
Global Moderators
global_moderators.png CS

Pope/Gardenmate sprinkler valve mod as detailed in..........

Post questions and info about pneumatic (compressed gas) powered cannons here. This includes discussion about valves, pipe types, compressors, alternate gas setups, and anything else relevant.
  • Author

Pope/Gardenmate sprinkler valve mod as detailed in..........

Unread postAuthor: JudgieSA » Tue Apr 17, 2007 3:57 am

this thread:
http://www.spudfiles.com/spudtech_archi ... d&start=20

I have two of these. Now i intend to use this method on them. Forgive my ignorance, but if the diagonal hole is widened (speaking of the diagonal hole show in this diagram: http://www.spudtech.com/content.asp?id=21) is widened to be the same diameter as the internal diameter of the blowgun nozzle tube, would going any larger be a case of deminishing returns? i aske because these particular valves can have the diagonal hole widened to blowgun I.D. without any visible change in integrity (i.e. bulging near drill hole, discolouration from drilling heat, etc, which would occur if the drill had gotten too close to the surface at any point). The two valves would be used on the one cannon and be triggered from the same blowgun.
  • 0

Posts: 7
Joined: Mon Mar 19, 2007 2:46 am
Reputation: 0

Return to Pneumatic Cannon Discussion

Who is online

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot]

Reputation System ©'