I drive a '96 dodge neon, and when i can afford to replace it i'm gonna fire a 7
pound lead ball at it at 140 psi

High school welding class, Acetylene and oxygen filled into an upside down coffe can on the ground, put flame to it and see how high the can goes

well i've now had my non-rated abs cannon past 125 psi without failure, hopefully i'll have higher figures tomorrow

SpudStuff wrote:ReTaRtEd

actually i had a miniscule leak from the threads on the sprinkler valve.
i was losing about 2 psi per minute, after the tape, no airloss

a pc power supply usually puts out 250-500 watts, that is like 1/4-1/2 an amp

if it still leaks after the epoxy, wrap it in electrical tape.
put on a couple of layers and then use a hairdryer on it to make it gummy.
repeat the process until you've used a whole roll of tape.
this only works for very small slow leaks

I have a spyder compact deluxe that i added venturi bolt, expansion chamber, 14" razor barrel. PMI electronic grip that i modded for the spyder (I don't like Spyder's electronics) raised sight rail, and tasco red dot optic. soon it will have 18" hammerhead rifled barrel, and a Q loader. i am not a f...

a lincoln ac 225 is a basic 240v arc welder, they retail for about $300, but they have been making them for like 40 years so it's easy to find a used one cheap.
there are also many very similar machines out there, some much cheaper than a lincoln.
myself, i think lincoln > all other welders

a friend of mine puts gasoline in a spray bottle to mist it into the chamber,
he swears by it, I like pneumatic myself

Kris is right, used paintballs get a soft spot where the c02 hits them, this makes them fly erratically and often burst in the barrel. when you do get a barrel burst you should immediately find cover and clean your gun out. (with a pro carbine i wouldnt necessarily do a complete field strip as it is...

A burr would NOT work as a choke because a choke gradually constricts the shot. The longer barrel would definitely help, as would porting and crowning the barrel (crowning is like cutting a reverse potato knife on the inside of the barrel). porting and crowning negate turbulence on projectile(s) as ...

The spinning barrells have nothing to do with cooling them! The whole design of a mini gun is made so it is efficiant, load, cock, fire, eject. This is going on as many times as it has barrells. And the only way to make that happen is to make it spin. Dude, the spinning barrels have alot to do with...

you could use a lincoln ac 225
you can run 225 amps at 27 volts

i cant find pressure rated pvc or abs, so my next cannon is all steel.

actually it was more than twice the price of non-pressure ratec pvc, and is thick walled.
it didn't appear to be cell cored when i cut and drilled it.
on the side it says abs-dee-dwv t1g2

edit: no pressure rating, got it at a home depot