Login    Register
User Information
Username:
Password:
We are a free and open
community, all are welcome.
Click here to Register
Sponsored
Who is online

In total there are 68 users online :: 5 registered, 0 hidden and 63 guests


Most users ever online was 155 on Mon Aug 15, 2016 1:40 am

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot] based on users active over the past 5 minutes

The Team
Administrators
Global Moderators
global_moderators.png CS

UBL

A place to ask general spud cannon related questions.
Sponsored 
  • Author
    Message

UBL

Unread postAuthor: PCGUY » Sat Feb 26, 2005 9:55 pm

<div align="center">UBL

Provided By - Bartman007

<img src="http://www.spudfiles.com/official_pics/UBLandTBBarrel.jpg">

This is Universal Breech Loader. With proper fittings on the barrel it allows this one breech loader to work with barrels ranging from 3" Sch80 to 3/4" SDR-21. It's built out of a 3" tee and uses modified sockets on the tee and the 3" threaded adapters on two legs of the tee. The third leg has a 3"x2" (SxT) bushing with a 2" threaded pipe nipple glue in to fit onto any gun with 2" threads. I use a 2" street elbow (TxT) to use it with my guns (mainly the STAG5) to use it in an over-under fashion. The breech end cap is a 3" male threaded end plug with a 3x2" bushing, a 2x3/4" bushing and a 3/4"x1/2" bushing with the pipe stop filed out. A 1/2" end cap is placed on a short section of 1/2" sch40 that goes through the mess of reducers. On the other side reducers a 1/2" female threaded adapter was glued. To this a 1/2" polypropylene sprinkler riser is threaded that serves as the breech ramrod.

The UBL is shown with a tennis ball barrel w/ 3" male threads.

<img src="http://www.spudfiles.com/official_pics/UBLDisassembled.jpg">

This is just a close-up of the UBL without any barrel. You can see the three main pieces, the body, the end cap, and the polypropylene sprinkler riser (mini-ramrod.) The red lines were used by me to attempt to cut the sockets as square as possible with a dremel (which melted the PVC even at the lowest setting.)

Provided By - Bartman007</div>
  • 0

Last edited by PCGUY on Sat Jul 29, 2006 1:33 am, edited 1 time in total.
Yes, I am the guy that owns & operates SpudFiles (along with our extremely helpful moderators).
User avatar
PCGUY
Site Admin
Site Admin
 
Posts: 1576
Joined: Wed Aug 18, 2004 10:54 pm
Location: Illinois
Country: United States (us)
Reputation: 19

Unread postAuthor: YobaRoba » Thu Apr 07, 2005 3:23 pm

:roll: :wink: :cry: 8) 8) 8) 8) 8) :shock: :P
  • 0

yahhhoooo

YobaRoba
Private
Private
 
Posts: 15
Joined: Mon Apr 04, 2005 4:18 pm
Reputation: 0

Unread postAuthor: iamthewalrus » Thu Apr 07, 2005 3:29 pm

yoba wtf?? anyway, i really like taht, so what is it? basicaly a bunch of reducers going from large to small so small pipes jsut go through till they get to their size?? right??
  • 0

User avatar
iamthewalrus
Colonel
Colonel
 
Posts: 559
Joined: Mon Feb 28, 2005 9:28 pm
Location: Iowa (SO BORING!!)
Reputation: 0

Unread postAuthor: CS » Thu Apr 07, 2005 4:45 pm

Pretty cool idea except you have to unscrew it every shot and pull it all the way out then screw it on again. Cool Idea 8) 8) 8)
  • 0

User avatar
CS
Donating Moderator
Donating Moderator
 
Posts: 1897
Joined: Fri Feb 18, 2005 5:32 pm
Location: Southern Utah
Country: United States (us)
Reputation: 4

Return to General Spud Cannon Related

Who is online

Registered users: Bing [Bot], Google [Bot], Google Adsense [Bot], MSNbot Media, Yahoo [Bot]

Reputation System ©'