Page 4 of 4

PostPosted: Sat Jul 01, 2006 11:07 pm
by Green Villain
RPK, be sure to read the whole post. Orbit mentioned it in the fourth post on this topic.

PostPosted: Sun Jul 02, 2006 9:13 pm
by RPK
<blockquote id="quote"><font size="1" face="tahoma,verdana,arial" id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Green Villain
[br]RPK, be sure to read the whole post. Orbit mentioned it in the fourth post on this topic.
<hr height="1" noshade id="quote"></blockquote id="quote"></font id="quote">

His post said he "heard" it worked, I was just comfirming

PostPosted: Sun Dec 24, 2006 11:58 pm
by demonseed
for airsoft get a terminator brand carbon arrow, trust me, take an airsfot round, go to walmart, remove the back piece the string fits into(slips right off) and put the round in, best fit ive ever seen, although you will spend about 3-5 dollars, but it is worth it, AND carbon arrows are extremely durable, you can bend them and smack them around adn they will still be perfectly straight, you will just have to cut off the little metal part at the tip where the head screws in. (10 seconds and a hacksaw)

PostPosted: Mon Dec 25, 2006 2:01 am
by PotatoNick
McMaster: 89965K43

This is aluminum tubing that I hope, as I've just ordered some, works well. The only problem is that the tolerance is +/- .006 on a .240 (6mm=.236) would make it possible so that the barrel may be too small in places. I think that .002 is so small that the BB may just push the tubing out to the right size. check out onlinemetals.com they have this http://onlinemetals.com/merchant.cfm?pi ... its=inches brass tubing that has a .245 ID and would be more desirable than copper tubing due to its increased rigidity.

PostPosted: Tue Dec 26, 2006 5:53 pm
by PotatoNick
I just got the above barrel today and all 6ft. of it had no problem passing the BB through. the BB easily rolled out.

PostPosted: Mon Jan 08, 2007 2:06 am
by MrCrowley
Weed-Sprayer gun nozzels also fit 6mm airsoft perfectly and its thick steel so no dents.