cloud capacity UPDATE

This area is for the discussion of BB or airsoft sub machine guns, and or other small arms such as pellets. No home made BB or airsoft guns should ever be used in a match where you shoot other people... they are too powerful.

Postby Kenny_McCormic » Sun Oct 15, 2006 8:34 pm

if i build a cloud from a 1.5" male plug, 1.5" female threaded adapter and 1.5" male threaded plug with a .25" brakeline barrel how many bbs do you guys think it could hold with the chamber half full? how many if i used 1"? also ive been told theese guns shoot ~100 rounds per second is this correct?
Kenny_McCormic
 
Posts: 122
Joined: Sat May 13, 2006 4:22 pm
 

Postby joannaardway » Mon Oct 16, 2006 6:51 am

Normally, a BBMG gets about 50-60 rounds a second, but it varies - there are tricks to increase ROF.

And do some maths! Work out the volume of your chamber, work out the volume of a BB (add a little bit, because not all space is filled), and divide appropriately - there, you have an answer!
joannaardway
 
Posts: 336
Joined: Mon Mar 27, 2006 11:34 am
Location: United Kingdom
 

Postby Ian2accurate » Mon Oct 16, 2006 3:03 pm

I think the "add a little bit" part kind of screws it all up. You should just fill up a pipe or something that will make a pretty good estimate of how much it can hold. I think mine holds around 700 and it is 1.25" x 6". I fill mine alot though. Also, it depends on whether you use metal BB's or airsoft bb's. I was talking about airsoft.
Ian2accurate
 
Posts: 2047
Joined: Sun Jan 11, 2004 12:30 am
Location: USA
 

Postby Kenny_McCormic » Mon Oct 16, 2006 3:28 pm

im talking about metal bbs. if i had the parts i would figure it myself but i dont yet. do you guys think it would hold 500 bbs? if any one has a 1.5" plug and one of thoose 350 count bb tubes do you think you could take the time to measure it out? if i had money id do it myself but i want to be shure of everything before i start.
Kenny_McCormic
 
Posts: 122
Joined: Sat May 13, 2006 4:22 pm
 

Sponsored

Sponsor
 
 

Postby jimmy » Mon Oct 16, 2006 3:29 pm

Heck, just measure the volume of the container the BBs came in to figure out the volume/bb (or airsoft).
jimmy
 
Posts: 790
Joined: Wed Jul 30, 2003 11:02 am
Location: USA
 

Postby Spudinator » Wed Oct 18, 2006 7:42 pm

About 1200-1500, depending on the length of your fittings (different brands vary by a bit) and how long you make the hopper.
Spudinator
 
Posts: 1491
Joined: Sat Sep 27, 2003 12:10 am
Location: USA
 

Postby SpudStuff » Wed Oct 18, 2006 7:49 pm

Buy the parts and figure out for yourself. Don't be a baby.
SpudStuff
 
Posts: 789
Joined: Sun Nov 20, 2005 2:06 am
Location: USA
 

Postby Kenny_McCormic » Thu Oct 19, 2006 4:36 pm

spudinator read my first post i was planning slpping a plug on a threaded adaptor drilling the holes add a blow gun and barrel and amaze my friends because im the only kid in town with a fully automatic bb gun
Kenny_McCormic
 
Posts: 122
Joined: Sat May 13, 2006 4:22 pm
 

Postby MisterSteve124 » Sun Oct 22, 2006 3:42 pm

Then get a job.
MisterSteve124
 
Posts: 93
Joined: Mon Apr 10, 2006 10:08 pm
Location: USA
 

Postby Kenny_McCormic » Sun Oct 22, 2006 8:26 pm

i live in a rurul area far away from anywhere i could get a job until i get a license i hate laws
anyways do they make female threaded x male slip couplers?
Kenny_McCormic
 
Posts: 122
Joined: Sat May 13, 2006 4:22 pm
 
 
Next

Return to BB/Airsoft/Pellet Guns