how does a bottom fed bbmg work

This area is for the discussion of BB or airsoft sub machine guns, and or other small arms such as pellets. No home made BB or airsoft guns should ever be used in a match where you shoot other people... they are too powerful.

Postby fidgety » Fri Dec 15, 2006 8:53 am

ok thankyou for your assistance
fidgety
 
Posts: 96
Joined: Tue Dec 05, 2006 8:34 am
Location: USA
 

Postby Kenny_McCormic » Fri Dec 22, 2006 8:47 pm

that is a clone of the larc bbmg they made in the 80s
Kenny_McCormic
 
Posts: 122
Joined: Sat May 13, 2006 4:22 pm
 

Postby dan003400 » Fri Jan 12, 2007 1:51 am

How does that vacume mechasim work for that black gun for 50 bucks?
dan003400
 
Posts: 7
Joined: Mon Oct 16, 2006 2:29 pm
 

Postby crashtestdummy » Fri Jan 12, 2007 12:25 pm

Well it's relatively simple to make, and there aren't expensive materials required. That's why it doesn't cost a lot. It's because he probably spent ~$15 making it, plus labor costs, or something along those prices.

Edit- -

If you mean how does the actual mechanism work, then as Plow said earlier, it's probably similar to Taker Labs BBMG. In the brochure that Kozak linked to, I can't see the cylinder that the tubes connect to, so it might even be as simple as two tubes sticking into the BBs.

When air is blown into the BB chamber through one tube, it exits through the barrel tube, causing the BBs to follow the air flow out of the barrel.
crashtestdummy
 
Posts: 245
Joined: Thu Jun 01, 2006 7:57 am
Location: USA
 

Sponsored

Sponsor
 
 

Postby TakerLabs » Sat Jan 13, 2007 6:51 pm

<CENTER>
<IMG SRC="http://www.geocities.com/takerlabs/TL02/TL02Photos/takersweepchamberexp.jpg" WIDTH= HEIGHT= ALT="[photo]">
<A HREF="http://www.geocities.com/takerlabs/TL02/sweepchamber.html">Try This</A>
</CENTER>
TakerLabs
 
Posts: 309
Joined: Thu Dec 30, 2004 2:11 pm
 
 
Previous

Return to BB/Airsoft/Pellet Guns

cron