SpudTech Archive

by **hk21_hunter** » Mon Nov 06, 2006 9:57 am

can someone email me an animation or a link to one showing how these work? the pics don't really show me how it works.

by **shadowscion** » Mon Nov 06, 2006 10:32 am

Yes they do, click the |> Play button and it will play the animation. You can even click the Slow button to slow it down, rewind, fast forward etc.

by **hk21_hunter** » Mon Nov 06, 2006 10:38 pm

oh, I didn't know that. sorry. but thanks man!!!!

by **bnoji** » Fri Nov 10, 2006 2:41 pm

Navigator7, I have the document you were looking for. I also have some extra stuff I was able to get from SuperFlow on testing. I'll see what I can put together.

by **Navigator7** » Fri Nov 10, 2006 2:50 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by bnoji
[br]Navigator7, I have the document you were looking for. I also have some extra stuff I was able to get from SuperFlow on testing. I'll see what I can put together.
<hr height="1" noshade id="quote"></blockquote id="quote">

Cool! What document was I looking for?

I admit I'm interested. Don't send me a .doc, however. Mac guy here.
;-)

by **clide** » Fri Nov 10, 2006 4:21 pm

Probably what you mentioned earlier about flow into pipes
--------------------------------------
I found and then lost a webpage that showed the flow into pipes.
Thought I could find it again and share....but naught.
Essentially it was establishing a coefficient rating for different pipe entrances.
Some very real figures for us spudders.
--------------------------------------

I would be interested too if you don't mind sending it to me as well bnoji.

And Nav, just in case you need to convert documents or anything, http://www.zamzar.com/ may come in handy.

by **Navigator7** » Fri Nov 10, 2006 4:50 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by clide
[br]Probably what you mentioned earlier about flow into pipes
--------------------------------------
I found and then lost a webpage that showed the flow into pipes.
Thought I could find it again and share....but naught.
Essentially it was establishing a coefficient rating for different pipe entrances.
Some very real figures for us spudders.
--------------------------------------

I would be interested too if you don't mind sending it to me as well bnoji.

And Nav, just in case you need to convert documents or anything, http://www.zamzar.com/ may come in handy.
<hr height="1" noshade id="quote"></blockquote id="quote">

I remember reading about flow in the deep well drilling....basically, sharp edges are the absolute worst for flow.
A feature I avoided with the WaterDawgÃ¢â€žÂ¢ by bullnosing every sharp edge.

Don't know if it made a difference but it sure works well.

by **Tom 06** » Sat Nov 25, 2006 11:43 pm

which valve would work best (open fastest, release more air, propel projectile further, take more pressure

by **rdx** » Sun Nov 26, 2006 3:40 am

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Tom 06
[br]which valve would work best (open fastest, release more air, propel projectile further, take more pressure
<hr height="1" noshade id="quote"></blockquote id="quote">

barrel sealing piston valve.how much pressure you are going to use:?:.
burstdisc open fastest, but it is not safe to use and you have to change the disck after every shot:x...
if your going to make your first valve make barrel sealing or coaxial piston valve:D

SpudTech Archive

Piston valves explained visually