SpudTech Archive

by **sharpshooter** » Wed Dec 06, 2006 8:12 pm

Mad professor, dont go digging up old threads. Noobs come in and want to post in everything, and it can just get annoying.

If you have something absolutly vital, then i spose it can be said. but just try to stay away from it.

by **SpudStuff** » Wed Dec 06, 2006 9:03 pm

That was very useful. And that did the trick. I remover all the seals and that crap the just heated it with a propane torch untill the sealent cought in fire. I let it burn off then torqed out the fittings.

by **c0mpl3x** » Wed Dec 06, 2006 11:01 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by SpudStuff
[br]That was very useful. And that did the trick. I remover all the seals and that crap the just heated it with a propane torch untill the sealent cought in fire. I let it burn off then torqed out the fittings.
<hr height="1" noshade id="quote"></blockquote id="quote">

owned. see sharpshooter? that was a hair on the side of asshole, noone suggested heat until he did, its a well known way of unsticking metal objects

by **pbmann123** » Fri Dec 08, 2006 1:04 am

How do you remover something? Is this some technical term I am unaware of?

by **BillyBobJoe** » Fri Dec 08, 2006 4:13 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by c0mpl3x
[br]<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by SpudStuff
[br]That was very useful. And that did the trick. I remover all the seals and that crap the just heated it with a propane torch untill the sealent cought in fire. I let it burn off then torqed out the fittings.
<hr height="1" noshade id="quote"></blockquote id="quote">

owned. see sharpshooter? that was a hair on the side of asshole, noone suggested heat until he did, its a well known way of unsticking metal objects
<hr height="1" noshade id="quote"></blockquote id="quote">

So I didn't mention heating it in the second post on this page?;)

Just flaming someone that flamed someone who flamed another person who was semi right to be flamed.

by **SpudStuff** » Sat Dec 09, 2006 2:35 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by SpudMonster
[br]<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by SpudStuff
[br]Oh sorry typo. It is 6000 PSI (six thousand). I also got a valve that is like 10000 PSI (ten thousand)- something like 355 torr-3. I take it that is a vaccume rating. It is Robbins Aviation. It is like a solid block of stainless. It is a needle valve and has a 1/32 orfice.
<hr height="1" noshade id="quote"></blockquote id="quote">

ZOMG! Got any pictures?
<hr height="1" noshade id="quote"></blockquote id="quote">

<center>
<a href="http://i92.photobucket.com/albums/l39/SpudStuff/CIMG3688.jpg" target="_blank">
<img src="http://i92.photobucket.com/albums/l39/SpudStuff/th_CIMG3688.jpg"></a>
<a href="http://i92.photobucket.com/albums/l39/SpudStuff/CIMG3681-2.jpg" target="_blank">
<img src="http://i92.photobucket.com/albums/l39/SpudStuff/th_CIMG3681-2.jpg"></a>
</center><center>
<a href="http://i92.photobucket.com/albums/l39/SpudStuff/Reg_And_Needle_ValVe_View_SmallH-3.jpg" target="_blank">
<img src="http://i92.photobucket.com/albums/l39/SpudStuff/th_Reg_And_Needle_ValVe_View_SmallH-3.jpg"></a>
</center>
Valve with the yellow handle in the first pic.
6000 PSI 316SS check valve in the second pic.
10000 PSI 304SS valve labled "E" in the third pic.

by **sharpshooter** » Sun Dec 10, 2006 3:43 pm

How was i semi right to be flamed? I was questioning a post that had been already stated, and was several months old. I just figured spudstuff had it off since he didnt post again sayin it didnt work.

by **BewareOfDog** » Sun Dec 10, 2006 4:12 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by sharpshooter
[br]How was i semi right to be flamed? I was questioning a post that had been already stated, and was several months old. I just figured spudstuff had it off since he didnt post again sayin it didnt work.
<hr height="1" noshade id="quote"></blockquote id="quote">

Because you cannot discover new oceans, unless you have the courage to lose sight of the shore.

by **SpudStuff** » Sun Dec 10, 2006 5:20 pm

? That made no sence.

by **BillyBobJoe** » Sun Dec 10, 2006 8:48 pm

It makes perfect sense to me, its like if a tree falls in the forest, and there's no one there to hear it, does it still make a sound?

Anyway, sharpshooter, you were right to flame Madprofessor, but not entirely because he did say something useful, but I had already said the same useful thing without the recognition of it being useful.

Now this thread is becoming pointless, so nice valves Spudstuff, I hope they are going to be put to good use!

SpudTech Archive

Removing fittings from a really expensive valve.