supah-valve

by **BewareOfDog** » Sun Mar 04, 2007 2:42 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by spuzi14
I expect this topic to be locked soon.
<hr height="1" noshade id="quote"></blockquote id="quote">

<img src="http://upload.wikimedia.org/wikipedia/en/thumb/2/20/MermaidMan.PNG/150px-MermaidMan.PNG"> ~AWWW.- That would suck barnacles! - Um, wait... That didn't sound right!?

by **BewareOfDog** » Sun Mar 04, 2007 2:52 pm

<blockquote id="quote">quote:<hr height="1" noshade id="quote">Originally posted by Rmich732
<img src="http://www.macacos.com/wp-content/uploads/2006/08/jackmakeschuckcry.jpg">
<hr height="1" noshade id="quote"></blockquote id="quote">

<img src="http://myspace-761.vo.llnwd.net/00405/16/74/405694761_l.jpg">
Frosty the snowman melts, making Jack Bauer cry

by **brianfury** » Tue Mar 06, 2007 12:49 pm

I dont want it from the guy who owns the site you moron... I want it from someone else, cmon now why would I be posting about it if I could just buy it? I wanna buy a used one from someone or figure out how to make one for myself.

by **sgort87** » Tue Mar 06, 2007 1:55 pm

Briafury, you will have to excuse Security1. He's an idiot.

There aren't many people willing to sell you their Supah, but there are similar valves on the market if you look around. You could also make your own valve, but making it Supah-quality requires special tools and a lot of knowledge and experience with these valves.

Security1, please follow the advise in your own signature.

**Sponsored**

by **brianfury** » Tue Mar 06, 2007 2:14 pm

Any idea where I can get a similar valve? Ive looked alot, and as for making my own, I have a lot of skill with making stuff I just dont have any scematic of any type... Any suggestions?

by **TalonXxX** » Tue Mar 06, 2007 3:45 pm

lol did you read my post brainfury? I can make you a cheap, less powerful valve... I've sold half a dozen with satisfied customers. sgort can build you one that will more closely match the power of a supah. Those are just two options...

by **brianfury** » Tue Mar 06, 2007 3:59 pm

hit me up at thosewhohatedmecreatedme@gmail.com i have a few questions: why isnt it as powerful? what makes it not as powerful? can you make it as powerful? i need 3 inch, can you do that?

by **frankrede** » Wed Mar 07, 2007 11:48 pm

They may not be as powerful because they aren't made with the same level of quality and tolerances that the supah valve is made with.
I personally recommend sgorts valves

by **BewareOfDog** » Thu Mar 08, 2007 12:17 am

You think you need a full-port 3-inch "valve"???

Buy yourself a 3" SCH80 Union and make a simple burst-disc cannon! There's nothing as simple, inexpensive or as powerful as it can be.

I would highly advise against attempting to make it a hand-held launcher though, as you can be seriously injured.

I've gotten some to dump at pressures in excess of 130psi, with a single-layer disc fabricated from HDPE plastic.

by **Suppresive Fire** » Fri Mar 09, 2007 7:38 pm

The supah's are full port? I would think that the flow would be constricted and slowed by the 90 degree bend.

brianfury- If you want a high performance full port valve than biuld a coaxial with 3in and 6in pipe.