Page 2 of 2
Posted: Sun Sep 16, 2007 4:10 am
by jackssmirkingrevenge
Can't you use a blade to bevel them manually from the inside?
Posted: Sun Sep 16, 2007 5:02 pm
by dongfang
Hi Jack,
I used a ball-shaped grinding thing , larger than the hole, for a Dremel.
And as for the color: I would like to see flat (matte) army green, no camo.
Regards
Soren
Posted: Wed Sep 26, 2007 8:20 pm
by e1337
Inside the tee, how many inches of sch 40 2in pvc is in there? Also did you dremel the tee out so you can fit the pipe in it? Did you just glue the part of the coulper to the bushing or did you use epoxy? And how many inches is there between the 2in pipe and the end of the tee?
Help,
e1337
Posted: Wed Sep 26, 2007 9:30 pm
by unisonmind
e1337-inside the tee there is 1 3/4'' of 2'' sch40 and there is 1 1/2'' of space between 2'' pipe and the end of the tee. i did dremel out the tee but make sure you do it even so the 2'' pipe is level. i started a 1/8'' past middle line in the tee. and i did just prim and glue the coupling in to the bushing but if you need pics i took a lot when i was making the valve. here it the tread with the valve
http://www.spudfiles.com/forums/the-sta ... 10049.html
if you need more pics or help PM me
Posted: Thu Sep 27, 2007 3:23 pm
by e1337
Nah i understand now, thanks a bunch. Ill post my valve by christmas (i need money for a dremel) and modify your design a bit.
peace,
e1337
Posted: Mon Oct 29, 2007 6:03 pm
by unisonmind
i did a little update. i got all the little bugs worked out of the valve so i put my QEV back on it gives it a little more power and i did this paint job so win someone asks me (hey what is that thing) i can just say go to SPUDFILES.COM
Posted: Tue Oct 30, 2007 4:11 am
by mtronic
:salute: awesome paint job man, very nice build and sounds like it does some massive dmg
Posted: Tue Oct 30, 2007 4:20 am
by Novacastrian
Posted: Tue Oct 30, 2007 4:41 am
by jackssmirkingrevenge
looking good, way to promote the forum
Posted: Tue Oct 30, 2007 7:01 am
by dauphinoise potato
Absolutely awesome
Great paint job.
Posted: Tue Oct 30, 2007 9:33 am
by unisonmind
thanks for all the nice comments. this forum as done so much for me i had to find a way to get it out there.
Posted: Fri Apr 06, 2012 8:57 pm
by jsefcik
no to up rise this topic, but unisonmind sold me this valve and its so dam powerful and its not even funny!!!