Page 2 of 5
Posted: Sat Jun 11, 2005 4:08 pm
by Mac_User
Nice Call spudshot, don't think i noticed that one
.
Posted: Sun Jun 12, 2005 8:42 pm
by matt519
please explain valve mechanism
Posted: Sun Jun 12, 2005 9:27 pm
by iamthewalrus
are u talkin bout the blowgun or the diaphram?
Posted: Mon Jun 13, 2005 6:41 am
by spudshot
i think he means the diaphragm, a diaphragm valve is basically a piece of rubber that sits between the barrel (goes thru the chamber) and the male adapter or plug on the back of the cannon. when air is pushed in the diaphragm bends and allows air go go into the chamber, when the small bit of air behind the diaphragm is released(using the blowgun) the diaphragm bends the other way and the air in the chamber goes through the barrel
Posted: Mon Jun 13, 2005 4:39 pm
by matt519
can someone explain how i make the valve
Posted: Mon Jun 13, 2005 4:41 pm
by matt519
sorry for asking the same question twice
Posted: Mon Jun 13, 2005 4:55 pm
by matt519
does anyone have any suggestions what could i use in place of the neopreme cymbal muffler for the diaphram
Posted: Mon Jun 13, 2005 5:52 pm
by drac
The lid off of a Tupperware container would work well.
Also another piece of advice, instead of posting three times in a row, you can use the edit button. It allows you to change your posts.
Posted: Mon Jun 13, 2005 5:53 pm
by spudshot
firstly, edit your posts, dont make 3 in a row, secondly, sheet rubber, and you can get neoprene from other places than cymbal mufflers, your hardware store should carry it in one form or another, also try some Fernco Quik Caps, they're rubber fittings for pipe with a hose clamp on them, cut out the size you need from it and use it as a phragm
Posted: Mon Jun 13, 2005 8:42 pm
by iamthewalrus
i use a rubber drain plug, they only cost $.96 at walmart
Posted: Mon Jul 25, 2005 2:11 pm
by darthtator
ya lol america is the only country screwed up enough to change what already is a perfectly good name. I am refering to the soccer ball confusion on the first page. Sorry I didn't know there was two pages.
Posted: Sat Aug 27, 2005 2:52 pm
by beebs111
hey what size pvc is ur chamber? i dont want planz or anything but i can't tell if the chamber is 2" or 1.5 or what.
thanks alot
Posted: Sat Aug 27, 2005 3:12 pm
by spudshot
judging the size difference between the 2.5" barrel and the chamber i'd say its 1.5"
Posted: Sat Aug 27, 2005 4:52 pm
by beebs111
Posted: Sat Aug 27, 2005 8:29 pm
by beebs111
is it cpvc or sch80 3/4" cuz my marbles dont fit at all in my reg sch40 3/4" barrel