Page 2 of 2
Posted: Sun Oct 09, 2005 2:16 pm
by beebs111
does any one know a place where i can get a 3 inch valve like that other that ebay????? i havent been havin too much luck there........... "sigh"
Posted: Sun Oct 09, 2005 4:28 pm
by CS
http://www.mcmaster.com/ should have something like it or similar.
Posted: Sun Oct 09, 2005 5:05 pm
by boilingleadbath
Eh, the 3" sprinkler probably has roughly the same flow as the supah, maybe a little more - matters what the effischency of the flow in the supah is, being the same flow at supah_effishency = 74%... it's unlikely to be that high.
The opening time of an estimate of what the supah is gives me 3 ms, and an estimate of this valve gives me roughly the same opening time - but it "honks"...
It's probably a toss-up, preformance-wise. I'v heard good things about sprinklers, though...
Posted: Mon Oct 10, 2005 8:09 am
by beebs111
Posted: Mon Oct 10, 2005 10:17 am
by drac
http://ebay.com/
eBay is your friend. Use it, but don't abuse it.
Posted: Mon Oct 10, 2005 7:10 pm
by beebs111
does any one have any ideas for what i should search for for a valve like this or whats on the gb cannon? i havent been havin any luck with 3" sprinkler valve for a search on ebay
Posted: Wed Apr 05, 2006 10:30 pm
by SpudStuff
i dont think so because the supah uses a 3in opening too, and its already better then sprinkler, so if they have the same size hole, the supah has even more air flow.
the spuah is a three inch tee with a two inch flow.
Posted: Thu Apr 06, 2006 6:08 pm
by Shrimphead
Once again, dead topic.