Page 3 of 9

paintball

Posted: Sun Mar 12, 2006 1:33 pm
by )DEMON(
hi im new and i am currently making a paintball gun but i am having trouble with the meck. please could you send me a list of stuff that i need to make your gun and what goes where because i would really like to encorperate your semi auto meck. into my prototype :D

*This was my first post by the way. :P

Posted: Sun Mar 12, 2006 2:37 pm
by spudshot
clide did alot of custom machining on this gun, i really doubt there is a straight list of materials, and plans that he has lying around.

Posted: Sun Mar 12, 2006 7:47 pm
by Shrimphead
"Sorry, no exact plans. It would take a lot of time and be very difficult for anyone to do without a lathe" - Clide (The maker of the gun)

It's a very complicated gun, not good for noobies.

Posted: Sun Mar 12, 2006 8:53 pm
by dragon finder
http://www.gizmology.net/pbm.htm this guy is making a paint ball gun.

Posted: Mon Mar 13, 2006 11:20 am
by taz22
the biggest problem of that 1 is there isn't a valve so you have to design it yourself

Posted: Mon Mar 13, 2006 3:38 pm
by spudshot
there is a valve on that gun.

Posted: Tue Mar 14, 2006 12:39 am
by )DEMON(
it is ok i was just confused about the meck. but i know what im doing so il be able to build it, it is a very good design but could you use it to play actual paintball with

Posted: Tue Mar 14, 2006 1:57 am
by Brian the brain
not wile its connected to a compressor.
You'll need a CO2 kit

Posted: Tue Mar 14, 2006 2:34 am
by disaster-rebal
hay man its awsome could u put a list of all the matirials and mesurments up plzzzzz :) :) :) its by far the best gun on this site it would be good if ppl had that amount of detail to make there own

Posted: Tue Mar 14, 2006 6:32 am
by spudshot
demon, you cant use it in a paintball game, it puts holes through galvanized roofing while running on clide's compressor. the FPS would probably be too high to play anyway.

disaster, i've found there is almost enough info there to build your own, i just cant figure out what kind of fitting/pipe he used for the trigger mechanism. yours might be + or - a few fractions of an inch because everything is custom machined, but if you know what size piping you will use, you just need to work the parts to fit.

Posted: Tue Mar 14, 2006 12:21 pm
by )DEMON(
ha ha i see what you mean spudshot ,i downloaded the clip but did it make holes in the metal and how much psi was he putting through the thing anyway?
i decided il make that gun when im finished with a quick project that im half way done with, its basically a solid pvc piece 600mm long with a breech loader and a valve system, il submit it when im done

*( :lol: , I didn't make this cannon, way to much macheining and that cannon didn't work)

Posted: Thu Mar 30, 2006 11:47 pm
by joemama
so what do u use to keept the paint ball from moving down

Posted: Fri Mar 31, 2006 2:25 pm
by joemama
how do u keep the paintball from moiving down the barrl

Posted: Fri Mar 31, 2006 6:29 pm
by Atlantis
For one don't double post, two, learn how to spell. There is usually an O-Ring or a small piece of tape in there to keep the ball still but still allow it to move when fired.

Posted: Tue Apr 04, 2006 7:28 pm
by WOW!!
sweet job with that, iam going to try and make a 3 inch piston cause i have 2 10' 4" chambers and 2 5' 4" chambers and it is to much money to buy sprinkler vavles for it, sweet job :D