SpudFiles

Updated Pictures of schmanman's 18 foot pneumatic.

I recently repainted it. It is pictured here with the 10' long, 3" diameter barrel,the 15' long 4" diameter barrel,and the 15' long, 2" diameter barrel. I cut off the two 6' long, 4" diameter air chambers,and replaced them with two 5' long,6" diameter chambers. It turned out great.for the original post ,damage pictures,and more on its construction,valve,ect. ,go to the given link. http://www.spudfiles.com/forums/viewtop ... b622ce7b8d .






This is a picture of me under the cannon.I am standing right under the barrel. keep in mind I am 5'10" tall. The very tip of the barrel is 8-10 feet in the air.the barrel in this picture is the 18' long, 4" diameter one







The picture above shows the 2" diameter barrel (on the gun), the 3" diameter barrel (the shorter one,on the ground), and the 4" diameter barrel, (the biggest one,laying on the ground)

it looks so good now i cant even tell that it was pvc

and you look so happy

Thanks!!! I'll add some more pictures to this post. It looks like somthing the S.W.A.T team would use doesnt it?

THATS IT!!!! I'll call it the S.W.A.T gun

i remember watching swat and they had that cannon that you shoot a grapple into a wall, then tear the house down.

you should try for the sound barrier, good luck, and get some helium

Why didn't you just add the pictures of the painted cannon onto your old posts, are you going for a posting record? Also, why did'nt you just have the chamber on the ground as a base and tilt the barrel?

That is a killer cannon. I wish I could make that oh well when I get a job I will the paint job is awsome.
cool I'm a captin yay

pimpmann22 please dont delete this post
atlantis,I'll answer all your questions for you.
1 Why didn't you just add the pictures of the painted cannon onto your old posts?
answer:
on the forum rules,they state to keep it below 10 pictures per post. these would put it way over the limit,so I started this thread. Why do you care?
2. are you going for a posting record?
answer:
no,and as far as I can tell,from under your "signiture" ,you've got me beat by over 100 posts
3.why did'nt you just have the chamber on the ground as a base and tilt the barrel?
answer:
because in order to move this around,I need wheels,and the stand on the front (folding banquet table legs) folds up so I can lay it down on the ground,level,so I can shoot it at stuff. If I had used the chambers as the stand and layed them on the ground,and angled the barrel up, I
A.could not have transported it by myself
and
B.would have had to angle the valve up, which then would have made it so I could'nt shoot it at stuff with out propping the back up with a ton of stuff to level it out.
these things would have made portibility almost non-existent ,and it would be nowhere near as versitile.
atlantis, please try to be nice this is the second or third time you've been negative to me in one of my posts.

Ummmmm why would I delete your post???

Atlantis what is the deal with ripping on him? Your post puzzles me. Schmanman, I do not disagree with your reply seeing as Atlantis post was not to contribute or better the forum, and appeared to be a worthless post.

atlantis, i dont think you're stupid, but your 3rd question kinda is... why would anyone make a cannon like that and fix the angle?

and dragon finder, nice avatar, didnt you knew chinese.

thats awsome although you should use a larger pilet valve, say a 2 inch sprinkler valve

You wouldn't notice much, if any, increase in preformance with that valve if you upgraded it from the current pilot valve to a 2" sprinkler.

saladtossser wrote:didnt you knew chinese.

I am unshure what you said ither from misspelling or something els?
I bet you can't guess what it means

back on topic,please !!!!!! and Holy S*^# Its Still Going, I've tried,and cant find one anywere. I dont think it really needs a preformance increase,anyway

what do you use to fill that thing a bike pump wont work or a small small compresser(well thay will work but by the time you fill it up you wont be able to fire it due to it being night time.)

For my birthday,I got a 15 gallon,6.5 cfm @ 40 psi and 5.5 cfm @90 psi compresser. it goes up to 150 psi max.

when you fill all the way to 150 psi,then hook it up to the gun,It litterally fills the whole thing to 90 psi in 3/4 of a minute to 1 minute. I've shot for distance,but olny up to 30 psi. At that pressure,With headwind,it still shot 400-500 yards (I mesured it with google earth). I've now brought it up to 90 psi to shoot it at stuff. WOW!!!!! It kicked,oh,6 feet. And , I use the compressor with air tools in my workshop.