Page 2 of 3
Posted: Fri Jun 30, 2006 4:37 am
by rna_duelers
You no what tetsuo315, im so impressed with that gun and i have alot of spud bux lying around(well i have a small amount compared to some)...so here have about.... 300 and buy yourself a nice signature. And hurry up on the new pics! Must see really cool gun the 2nd.!!!
Posted: Sat Aug 26, 2006 3:44 pm
by Tetsuo315
Ok GGDT Was pretty close with this gun. GGDT quoted the FPS @ 812. I Chronographed an average velocity of 785-793 FPS. Now thats more like it. Although 800 FPS would be nice. I will need to get the chamber to a higher pressure.
Posted: Sat Aug 26, 2006 4:07 pm
by Bluetooth
Im with demon, ive never build a combustion (unless you count a pill bottle and a pen tube).
Posted: Sat Aug 26, 2006 5:23 pm
by MrCrowley
how good do the PBs fit in your barrel as theyre .68cal and your barrel is 3/4"
Posted: Sat Aug 26, 2006 8:13 pm
by Tetsuo315
Yes they fit the barrel. I use 3/4" CPVC.
Posted: Sat Aug 26, 2006 8:35 pm
by MrCrowley
whats the I.D of 3/4" CPVC?
Posted: Sat Aug 26, 2006 10:19 pm
by singularity
.72 i think
and now to add more words....
Posted: Sun Aug 27, 2006 12:42 am
by MrCrowley
ok so a PB has a 1.2mm or .04" gap
Posted: Sun Aug 27, 2006 12:45 pm
by noname
That puts 1/2" SDR 13.5 at a better fit with .69 ID doesn't it now?
Posted: Sun Aug 27, 2006 1:37 pm
by SpudStuff
sleve inside 3/4" sdr 35
Posted: Sun Aug 27, 2006 1:41 pm
by schmanman
Is it possible to machene an adaptor with the correct threads for a actual paint ball gun aftermarket barrel on one side,and,say, 1 inch or 3/4 inch NPT threads on the other?
Posted: Sun Aug 27, 2006 2:10 pm
by MrCrowley
paintball barrels cost $80 here,but i spose it would work, you can get hand held pipe threaders as well.i was thinking about using a proper PB barrel but as i said before its $80NZD for 12"
Posted: Sun Aug 27, 2006 10:54 pm
by noname
This guy who owns a machine shop saw my guns and said I could go in and weld steel cannons for free and stuff, I'll bring in my paintball gun barrel and see about machining threads for a paintball gun on PVC.
Posted: Mon Aug 28, 2006 7:45 am
by schmanman
yeah, that would be cool. screw cpvc, right !
Posted: Mon Aug 28, 2006 10:04 am
by noname
38 inches is the longest piece of SDR 13.5 I could get without it bending, so guess how long my paintball gun barrel will be if I can put threads on.
