Page 1 of 2

Extreme Coaxial, now with stock!

Posted: Wed Jun 14, 2006 9:54 pm
by noname
I finally added a stock to the coax. Whenever someone shot it, the valve vented right on your ear, so I measured and added so now when I put the stock against my shoulder, my hand comes out right on the blowgun. It is now much quieter and easier to use.

Here is a pic of the busted diaphragm I talked about, along with all the other info for the launcher
http://www.spudfiles.com/forums/viewtopic.php?t=2146&

Posted: Thu Jun 29, 2006 4:54 pm
by PVC Arsenal 17
where do you fill this gun up from?

Posted: Thu Jun 29, 2006 5:30 pm
by rna_duelers
I like it,so how far does it shoot? And where is it filled up from?

Posted: Thu Jun 29, 2006 8:02 pm
by SpudStuff
t is probably filled from the back of the gun.

Posted: Fri Jun 30, 2006 6:06 pm
by noname
There is a schrader tapped into the plug. I love my bike pump. :D

Posted: Fri Jun 30, 2006 9:25 pm
by x.X.Cpt.Rollhart.X.x
The paint job is not very nice ... and the pink grip dont match with your gun ...

but the cannon must be powerful !

Posted: Fri Jun 30, 2006 11:20 pm
by noname
Exactly. Why would I want to have the colors match? That takes all the fun out of it. And the paintjob is good, it's just an ugly color. :D

The C:B ratio is 9.5:1, yes, it's strong. I can shoot a paintball 820 fps.

Posted: Fri Jun 30, 2006 11:41 pm
by SpudStuff
820 seems way to high. lets see a cronograph reading. did you measure that with a crono or did you use ggdt

Posted: Sat Jul 01, 2006 10:16 am
by noname
It was a chrono at a paintball field so I don't have pics sorry. I'm not lying though.

Posted: Wed Jul 05, 2006 7:55 pm
by PVC Arsenal 17
I started making one of these the other day and I must say, it was real bitch trying to allign the two tees. They came out a smidgen crooked but oh well, it'll still shoot.

Posted: Wed Jul 05, 2006 9:24 pm
by noname
I don't even use the front T anymore because of the stock. I couln't find any Ys so I just used Ts. Try gluing on a flat surface.

Posted: Thu Jul 06, 2006 9:54 am
by PVC Arsenal 17
what is your diaphragm made of. Mine is most likely going to be fixed.

Posted: Thu Jul 06, 2006 9:56 am
by noname
Mine is just some 1/8" thick neoprene rubber.

Posted: Sat Jul 15, 2006 2:18 pm
by Velocity
C:B ratio of 9.5:1??? Thats pretty high... if you had kept the barrel longer, your performance would have been increased.

Even with a 9.5:1 ratio, you got 820 fps? Im not trying to offend you or anything, but that sounds incredibly unrealistic.

Could you tell me the dimensions of your cannon? I dunno, 9.5:1 just seems off too me

nice coaxial though

Posted: Sat Jul 15, 2006 2:26 pm
by huse_spud
give us some stats and we'll plug them in the GGDT and see if we get similar results.

820 fps sounds like a bit too much for such a short barrel.

what psi did u fire at? 200? :lol: