Here is my second ever gun im 12 (13 in January) and it has homemade iron sights built from brass plate and copper, soldered to the barrel, the tape around the front is to hold the wire in-place, tomorrow im building a steel stock and body body has been delayed as it will be cnc milled aluminium to look like a g3 as i have no steel welding rods. Accuracy video at 80psi is uploaded
New rear iron sight it looks like a g3 sight, not very effective but i might order a real iron sight for a g3, depends if you can ship assault rifle parts to the uk
sorry for no audio my digital camera hasn't got a microphone but it is really loud when fired, im going to put a ballvalve between the QC and the gun because in excess of 400 psi it leaks horribly.
[youtube][/youtube] 8)
Posted: Sat Oct 29, 2011 5:48 pm
by warhead052
Not bad. I like the iron sights!
Posted: Sat Oct 29, 2011 5:50 pm
by Goats spudz
warhead052 wrote:Not bad. I like the iron sights!
the rear sight works a treat but on camera you really cant see through it
it will be semi-auto when i get my slide check
Posted: Sat Oct 29, 2011 7:03 pm
by Gun Freak
For semi auto you may want a smaller chamber. Looks good man. Age doesn't really have anything to do with it though
Cats are the new feet
Posted: Sat Oct 29, 2011 7:16 pm
by Goats spudz
Gun Freak wrote:For semi auto you may want a smaller chamber. Looks good man. Age doesn't really have anything to do with it though
Cats are the new feet
Im putting the co2 tank in the stock through the slide check and using a small length of pipe as the chamber!
:hello2:
Posted: Sat Oct 29, 2011 7:38 pm
by Zeus
Good work, I hope that the cat has nothing to do with the fridgy though.
Posted: Sat Oct 29, 2011 7:47 pm
by jhalek90
Gun Freak wrote:
Cats are the new feet
Lol, i spy a challenge....
back on topic: Looks good, i like the front sight.
Posted: Sat Oct 29, 2011 7:51 pm
by Gun Freak
Sounds good Goat. How much pressure are you currently using? I wouldn't trust that little clamp hose setup on your fridgy,
Posted: Sat Oct 29, 2011 8:56 pm
by Goats spudz
Gun Freak wrote:Sounds good Goat. How much pressure are you currently using? I wouldn't trust that little clamp hose setup on your fridgy,
Im using about 250 psi for pellets and screws that clamp was used to keep a 1/4" thingy onto a regulator i have had it at 700 psi with no leaks
Posted: Sun Oct 30, 2011 4:21 am
by cammyd32
Looks like a good gun nice work. can't wait to see the completed gun with stock, the iron sights look great on it
Posted: Sun Oct 30, 2011 8:13 am
by jmez1996
nicee.
I love the iron sights.
hahaha by the time your 18 you'll be designing pneumatic missiles
Posted: Sun Oct 30, 2011 8:31 am
by Goats spudz
jmez1996 wrote:nicee.
I love the iron sights.
hahaha by the time your 18 you'll be designing pneumatic missiles
haha maybe, hmmmm
and on the updated rear sight i have drilled a 6mm hole on the opposite side of the v shaped rear sight, and the sight rotates like the real thing and has different sights for different ranges, how sexy <3
Posted: Sun Oct 30, 2011 10:52 am
by pneumaticcannons
FINALLY ANOTHER MIDDLE SCHOOLER
thats a sweet gun you got their, can't wait for the stock...
I'm not alone
Posted: Sun Oct 30, 2011 12:10 pm
by Goats spudz
pneumaticcannons wrote:FINALLY ANOTHER MIDDLE SCHOOLER
thats a sweet gun you got their, can't wait for the stock...
I'm not alone
lol me and my dad made a stock in like 5 minutes out of wood, im aloud to use a bandsaw and a welder and a drill and lots of other stuff like lathes but not the angle grinder or the jigsaw hmmm
Posted: Sun Oct 30, 2011 10:51 pm
by pneumaticcannons
ahh you are a lucky one i see My parents hae.... strongly dislike most of my guns. why don't you're parents let you use a jigsaw lol?
body has been delayed as it will be cnc milled aluminium to look like a g3 as i have no steel welding rods. Accuracy video at 80psi is uploaded
nice work. can't wait to see the completed gun with stock, the iron sights look great on it 
