Posted: Fri Nov 04, 2011 10:17 pm
I have uploaded a new video of me shooting this air gun at its max rate of fire - which is 600 rounds per minute.
link:
link:
I must have it!!! :blob6:SpudFiles
Earth's largest potato gun resource
https://www.spudfiles.com/
My full automatic PVC AA battery gun (600 RPM)
Page 2 of 4
Posted: Fri Nov 04, 2011 10:44 pm
Oh. My. God. I must have it!!! :blob6:
I must have it!!! :blob6:Posted: Fri Nov 04, 2011 11:11 pm
Damn...
A SA/FA AA-battery gun has always been like one of my dream guns. Although after seeing the Nitron with its ball bearings... I'd probably go that route... plus it would be easier to adapt an existing paintball architecture to it.
I saw you initially posted this for shooting paintballs - did you post it on pbnation in the custom section? They'd get a kick out of it - its surprisingly simple yet one of the best full auto executions I've seen on here.
A SA/FA AA-battery gun has always been like one of my dream guns. Although after seeing the Nitron with its ball bearings... I'd probably go that route... plus it would be easier to adapt an existing paintball architecture to it.
I saw you initially posted this for shooting paintballs - did you post it on pbnation in the custom section? They'd get a kick out of it - its surprisingly simple yet one of the best full auto executions I've seen on here.
Posted: Fri Nov 04, 2011 11:33 pm
I just made a post on pbnation. Thanks for pointing it out to memobile chernobyl wrote:Damn...
A SA/FA AA-battery gun has always been like one of my dream guns. Although after seeing the Nitron with its ball bearings... I'd probably go that route... plus it would be easier to adapt an existing paintball architecture to it.
I saw you initially posted this for shooting paintballs - did you post it on pbnation in the custom section? They'd get a kick out of it - its surprisingly simple yet one of the best full auto executions I've seen on here.
http://www.pbnation.com/showthread.php? ... st73402009
Posted: Fri Nov 04, 2011 11:43 pm
I haven't been active on that site for a few years now, but there was always a lot of people trying to do what you have done - they would usually make something sub-standard in power to what a simple "advanced" pneumatic on here can achieve. You've outdone everything I've ever seen on there done with "PVC" lol.e_smith2000 wrote:
I just made a post on pbnation. Thanks for pointing it out to me
http://www.pbnation.com/showthread.php? ... st73402009
Now you just need to get your ROF north of 20 RPS and get a force fed loader on there for paintballs, or spring fed for AA's.
Automag was the first big blowfoward bolt design like most people use on here, and their mechanical system, albeit a bit more advanced than yours, could achieve a very high ROF. I bet with a better air supply you can too!
Posted: Sat Nov 05, 2011 12:00 am
I could increase the ROF by using the smaller tank i have on hand, but i would lose a lot of power.mobile chernobyl wrote: Now you just need to get your ROF north of 20 RPS and get a force fed loader on there for paintballs, or spring fed for AA's.
I could also decrease the firing PSI down from 80 psi to 40 - but again id lose a lot of power.
There is something else i could try... but i risk blowing up the sprinkler valve - As i'm firing the gun, i can increase the regulator to allow a running pressure of over 100 PSI. But i think that would require the compressor's regulator to be set at somewhere around 160 PSI which would kill my sprinkler valve if i were to stop firing the gun. I have done it before and it sounded like a motorcycle.
Posted: Sat Nov 05, 2011 12:04 am
I fire my sprinkler valve at 125PSI quite regularly. Mine is a cheap offbeat valve too. I wouldn't go any above 125 though.
Posted: Sat Nov 05, 2011 12:12 am
Nor should you as they are rated at 125 psi =DMr.Tallahassee wrote:I fire my sprinkler valve at 125PSI quite regularly. Mine is a cheap offbeat valve too. I wouldn't go any above 125 though.
Posted: Sat Nov 05, 2011 4:20 am
lol the white thing that pushes the ammo, its called the follower.
anyway great work man, gotta love the moments when you don't think it will work but does.
anyway great work man, gotta love the moments when you don't think it will work but does.
Posted: Sat Nov 05, 2011 8:55 am
Holy crap dude, that is awesome!! Gratz!!!
Posted: Sat Nov 05, 2011 9:01 am
WOW. that might be one of the best executed examples of full auto on this site... thought about using stabilized projectiles at all? maybe you could use some pipe with the same dimensions as a AA but fill the tip with lead. Maybe pointed....
Posted: Sat Nov 05, 2011 9:09 am
And it's pneumaticbest executed examples of full auto on this site
Posted: Sat Nov 05, 2011 9:29 am
Gun Freak wrote:And it's pneumaticbest executed examples of full auto on this site
Posted: Sat Nov 05, 2011 12:48 pm
Thanks! I am thinking about making another one... that can handle soda cans.pneumaticcannons wrote:WOW. that might be one of the best executed examples of full auto on this site...
In fact i have been thinking of using wooden pegs as the projectile - and thinking of the different ways i could stabilize that.pneumaticcannons wrote: thought about using stabilized projectiles at all?
Posted: Sat Nov 05, 2011 3:12 pm
Lorem ipsum dolor sit amet, consectetur adipiscing elit. Cras nec placerat erat. Vivamus dapibus egestas nunc, at eleifend neque. Suspendisse potenti. Sed dictum lacus eu nisl pretium vehicula. Ut faucibus hendrerit nisi. Integer ultricies orci eu ultrices malesuada. Fusce id mauris risus. Suspendisse finibus ligula et nisl rutrum efficitur. Vestibulum posuere erat pellentesque ornare venenatis. Integer commodo fermentum tortor in pharetra. Proin scelerisque consectetur posuere. Vestibulum molestie augue ac nibh feugiat scelerisque. Sed aliquet a nunc in mattis.