Page 1 of 1
Prototype 16 shot revolver
Posted: Sun Jul 12, 2015 9:06 pm
by Speakerguy
Re: Prototype 16 shot revolver
Posted: Mon Jul 13, 2015 5:59 pm
by mark.f
Looks nice! Any details as far as how it's indexed/rotated?
Re: Prototype 16 shot revolver
Posted: Mon Jul 13, 2015 6:53 pm
by Speakerguy
mark.f wrote:Looks nice! Any details as far as how it's indexed/rotated?
Hi Mark, its pretty simple but works great.. Here's a close up of the mechanism that advances the revolver.
I also use 3/4 steal balls spring loaded against the other side of the revolver that serves two purposes, first to push revolver forward to disengage it from the QEV and to also index the revolver so its lined up to the QEV and barrel once advanced.
Re: Prototype 16 shot revolver
Posted: Mon Jul 13, 2015 7:23 pm
by mark.f
Interesting. I figured a ball-detent would make the most sense.
Re: Prototype 16 shot revolver
Posted: Mon Jul 13, 2015 7:35 pm
by Speakerguy
mark.f wrote:Interesting. I figured a ball-detent would make the most sense.
Yup pretty much what i did but I just made a hole instead..
Re: Prototype 16 shot revolver
Posted: Wed Jul 15, 2015 5:23 am
by ToasT
Awesome. I do like big home built contraptions.
Re: Prototype 16 shot revolver
Posted: Wed Jul 15, 2015 9:00 pm
by Speakerguy
well today I finished it up.. shes big and heavy but I think I can use copper and aluminum to lighten this up a lot. Hopefully it will be smaller as well.. I also shot at 400psi today and its a whole other animal! It is super loud! I havent shot through the chrony yet but 5/16 nuts can pass right through 1/2 Baltic birch plywood and a wall with 2 layers of 5/8 sheetrock.. I'd like to go more pressure but I'm not sure where the limitations of the gas pipe are.. Anyway here's the completed pic