SpudFiles

Posted: **Mon Jul 24, 2006 5:18 pm**

Gun Name - Ghetto PB Assault Rifle
Type - Pneumatic
Chamber - Air tanks
Barrel size - 6 inches long / About 3/4 inside not quite though
Special Features -On trigger tap its 2-3 Shot burst, Also its fully automatic

pretty much thats self explainable just hold the trigger....
Powered by - air compressor or co2/nitrogen paintball/tank
Power - Actually its shooting about paintball gun speed...

Whenever my friend gets back from Newyork I'll get him over to video me shooting the gun...

Ok this Gun is really not just taped together it is glued but to make it more ghetto I decided to tape it to....

Posted: **Mon Jul 24, 2006 5:32 pm**

haha man thats awsome, this may be my project next summer, u using a reg, cause i belive those blow guns cant take to much psi

Posted: **Mon Jul 24, 2006 5:48 pm**

whoa, ghetto-tastic! i like it, a lot, i hope you dont pop that a+w bottle

Posted: **Mon Jul 24, 2006 6:09 pm**

Well the bottle is the hopper Lol and its got some tape kinda holding the top down where you load them it shouldnt pop since the paintballs shoot out without a bike pump and its not holding air in the bottle.

Edit: Also I just decided i want to change the bottle to something smaller maybe a vinager bottle...Ill update soon.

Posted: **Mon Jul 24, 2006 8:03 pm**

Man you have balls! The blowgun is rated for 90 psi and you are putting at least 3000 psi into it!!!

Posted: **Mon Jul 24, 2006 8:09 pm**

looks like its regulated to me buddy.

Posted: **Mon Jul 24, 2006 8:26 pm**

Well it can be regulated or use the paintball air tank its not blowing up or anything on me so i dont think anything is going to go wrong its so far ( about 5 days) has handled it

Posted: **Mon Jul 24, 2006 8:40 pm**

so you that blowgun (rated for 90 psi) really holds all the pressure of a paintball tank? i find that hard to believe. and now i agree with pvc arsenal, you do have some balls!

Posted: **Mon Jul 24, 2006 10:19 pm**

I'd regulate it down as far as it can go. Safety blowguns are supposed to be rated to 90 psi (I'm sure the pressure it takes to actually blow them up is much much higher for safety reasons) but I wouldn't trust it anyway.

The black tape around the a&w bottle makes it look like theres still root beer inside.

Posted: **Mon Jul 24, 2006 10:26 pm**

Hmmm I think im going to hook a huge nitogen tank to it and see how much harder it shoots but first i gotta get my dad to get it filled (its one of his other extra tanks i will use)

Who bets it'll blow my blowgun up I sure hope not though =\ its gonna suck when i get hit or it rips a huge crack in the blowgun

Posted: **Wed Jul 26, 2006 1:26 am**

how do you make shure the paintballs won't just fall out of the barel??

very clean design.

Posted: **Wed Jul 26, 2006 3:29 pm**

Well its got a piece of tape on the piece of pvc that goes into the back of the *tee and a rounded kinda homemade o-ring looking piece of tape in the front of the *tee also it wouldnt go through the barrel i chopped it off of a really old talon Lol...(it makes a snug fit to the paintball and i couldnt find paintball snug sized pvc here

*tee in the front

Posted: **Sun Aug 20, 2006 9:20 pm**

I use 3/4" pvc for my paintball rifle barrel. It seems to work fine with decent paintballs.

Posted: **Fri Aug 25, 2006 8:28 pm**

i want to make a paint ball gun like this... however whats with this blowgun blowing up??? and how can i make it high pressure??? =]

CHEERS

Posted: **Fri Aug 25, 2006 8:44 pm**

Well 1. the blowgun is rated to 90 psi (that means it could blow up at any higher pressures or at least there is a chance) and 2. normal paintball co2 tanks are pressurized to abought 2000 psi.