SpudFiles

I've been looking around for ages for a simple high pressure valve I could use for my piston gun but I've never actually considered a blowgun. What your doing is absolutely crazy, and pure luck has saved you so far. What brand is that blowgun though?

since his tank is a HPA tank, which is really compressed air, and seeing that there IS a pancake syle air compressor in the pictures, I'm guessing he charges his tank to 90 with the compressor, so it doens't have 3000 psi in it...

just a guess...

i know this thread is a bit old but to clear something up...

he has a compressed air tank. its ether high out put or low out put. high being 800psi low being normaly 300psi. the size of the bottle looks to be 68ci which is a normal size.

yes the bottle is filled to 3000 or maybe 4500psi depending on the bottle type. but its max out put is only 800psi

average tanks are pressured 3000 dumbass
Some have 4500
the least ive seen is 2500

yeah but they were saying that maybe he fills his pb tank with his air compressor so he's not a dumbass. If he isn't then he is pretty retarted for using a blowgun at 4500 psi.

The thing between the tank and the blowgun is a reg. I'm guessing that it's putting out about 300psi.

SEFishy wrote:i know this thread is a bit old but to clear something up...

he has a compressed air tank. its ether high out put or low out put. high being 800psi low being normaly 300psi. the size of the bottle looks to be 68ci which is a normal size.

yes the bottle is filled to 3000 or maybe 4500psi depending on the bottle type. but its max out put is only 800psi

My mistake originally saying the gun is getting 4500 or 3000 psi. This guy is absolutely right. It either has an output of 400 or 800 depending...

And there is no reg on the gun.