Page 2 of 6
Posted: Sun Sep 10, 2006 5:24 pm
by Brian the brain
Haha...finally some competition!!'
Clean looking piece of kit you got there.
How can one get 3 seconds of firing out of that little chamber??
You keep it hooked up to the compressor don'tcha??
Btw..My MG is now a lot more powerful.I got a wider hose on it and shortened the rise tube.
Killah, yours would be more powerful with a bigger chamber, I think
, but I'm not shure that would look better as well.
Nice gun!
Don't even mind coming second after this gun.Good to see more Marble MG's.We have the same taste it seems.
More of a hardcore- no BS -style of guns.
Does it make a nice BRRRRRRRRRRRPP sound???
(edit) sorry about the long post but I have some more to say:
1.How do you control bursts?? Doesn't the sprinkler valve just stay open??
2.Putting the mag a little to the side would make aiming easier
3.I have a higher rate of fire na-na-na-na-na!!
Well anyway..I still like it!!
Posted: Sun Sep 10, 2006 6:50 pm
by Velocity
Ok, im probably being a retard here... but i don't understand how it is full-auto.
it seems to me that it is either a semi-auto or burst fire... could you please clarify?
Posted: Mon Sep 11, 2006 12:18 am
by killagorrila99
saladtossser wrote:nice, i thought it was still in the works, what sized barrel is that? 3/4" cpvc?
salad, It was still in the works, untill my grandma gave me some money (aghh the pleasures of a nice grandma)
I will get a longer mag soon, but untill then I'll use this. I have only tested it to 40psi and the kick back is amazing! The barrel is a 16mm diametre peice of poly pipe.
Posted: Mon Sep 11, 2006 12:22 am
by killagorrila99
rmich732 wrote:Ok, im probably being a retard here... but i don't understand how it is full-auto.
it seems to me that it is either a semi-auto or burst fire... could you please clarify?
Its a burst fire gun. Oh and brian, it makes a very loverly BRRRRRRP sound.
Posted: Mon Sep 11, 2006 12:34 am
by MrCrowley
how much did that cost ya to make in aussie?
Posted: Mon Sep 11, 2006 12:40 am
by killagorrila99
$40. Most of the parts are metal, and metal is cheaper to buy that PVC and other plastics were I live. I tested again at 50 psi and decapitated a coffee can. Fricken wow.
Posted: Mon Sep 11, 2006 1:47 am
by MrCrowley
nice,$40 not bad thats like $50NZ,is it the fittings that cost the most
Posted: Mon Sep 11, 2006 1:49 am
by killagorrila99
Yea the metal 25mm tee was $4 bucks and therefore makes up one tenth of the cost (I think???)
Oh and if you look at the top of the valve, you can see were I plugged the thing that used to be the flow control with a screw and teflon. The reason was because the top of it broke off when I was trying to do the NO DRILL VALVE MODIFICATION by carl. The top broke off and made the damb valve LEAK. So I pluggged it. Works fine.
Posted: Mon Sep 11, 2006 2:07 am
by Urban Ninja
Thats insane, that design would be great for my AK47. Nice work killa. Awesome gun. Cant wait to see a vid if there is going to be one.
Posted: Mon Sep 11, 2006 2:09 am
by killagorrila99
Haha...finally some competition!!'
Clean looking piece of kit you got there.
How can one get 3 seconds of firing out of that little chamber??
You keep it hooked up to the compressor don'tcha??
Btw..My MG is now a lot more powerful.I got a wider hose on it and shortened the rise tube.
Killah, yours would be more powerful with a bigger chamber, I think , but I'm not shure that would look better as well.
Nice gun!
Don't even mind coming second after this gun.Good to see more Marble MG's.We have the same taste it seems.
More of a hardcore- no BS -style of guns.
Does it make a nice BRRRRRRRRRRRPP sound???
(edit) sorry about the long post but I have some more to say:
1.How do you control bursts?? Doesn't the sprinkler valve just stay open??
2.Putting the mag a little to the side would make aiming easier
3.I have a higher rate of fire na-na-na-na-na!!
Well anyway..I still like it!!
I will answer your questions. 1. the sprinkler valve will remain open untill i realese the blogun.
2.I have moved the mag to the side, because you said that. It is now spring fed.
3.My rate of fire, 340 rounds/min, was measured at 30 forking psi.
I'd say this gun at 120psi would out-do yours easily.
Posted: Mon Sep 11, 2006 5:53 am
by rna_duelers
Nice gun killa thanks 4 the mention on pic resizing
Im working on my mmg right now the only problem i have is with the feeder doesnt work very well, But nice gun and is that 20mm black irigation threaded pipe use on the barrel?
Posted: Mon Sep 11, 2006 6:14 am
by killagorrila99
no, its 16mm, perfect for marbles. Can stand upto 400psi.
Posted: Mon Sep 11, 2006 10:51 am
by Brian the brain
So the sprinkler closes immediately after you release the blowgun?
That's pretty cool!
Can't wait to see a video at 120 PSI
Posted: Tue Sep 12, 2006 12:13 am
by killagorrila99
AGHH, Man I just tried it at 100 psi. Emptied in less than a second.
Posted: Tue Sep 12, 2006 8:30 am
by experament_u2
im a bit new with pneumatic guns so could some one plz tell me how he made it automatic
btw sick gun