Page 1 of 1

Over Under Cannon

Posted: Sun Oct 29, 2006 12:01 pm
by dungdue0
Finished an over under cannon. The chamber is one and a half feet of 2" pipe. Valve is 3/4" modded sprinkler valve. The barrel is 3/4" also. This thing is powerful. I filled it up with water and it violently jerked my arm back. It's loud too, I painted it black with a clear coat but the clear coat made it look like crap. It had a red dot cheap scope thing on it but it fell off. :oops: .

Image
Image
Image
Image
Image

Oh yeah I have a video of it dry firing.


Sadly, it doesn't have a removable barrel. But 5/8" wooden dowel rods fit almost prfectly in it with a small layer of tape.

Posted: Sun Oct 29, 2006 12:16 pm
by ProfessorAmadeus
I like it! The paint job loooks fine so i dont know what your talking about. I dont know why I like but its just so streamlined and isnt all types crap hanging off to the side. I also like the second gun in there but you should repaint it.

Jesus people comment on his gun. Its a cool gun and deseverves positive comments!

Posted: Sun Oct 29, 2006 2:12 pm
by dungdue0
Thanks!

My camera is just so crappy you can't see the color distortion. :lol:

Posted: Sun Oct 29, 2006 2:19 pm
by SpudStuff
Very nice! You should trim off thoes wires. Or just remove the solinoid and epoxy the hole. Welcome to the forums.

Posted: Sun Oct 29, 2006 2:33 pm
by dungdue0
Actually I've been here for at least 3 months. I don't have any epoxy.

Yesterday I was trying to find a way to make that red dot scope useful. I was outside "calibrating" it and when I look through it the hole think just kind of rolls off. I laughed for a good 5 minutes about it. Don't ever use hot glue for anything lol.

Posted: Mon Oct 30, 2006 1:31 am
by rna_duelers
Nice cannon,i love rifle like cannons they are my fav!What type of sprinkler valve was used?And do you want 170 spud bux?

Posted: Mon Oct 30, 2006 1:37 am
by SpudStuff
Thoes are 1" rainbird valves, very common in the US.

Posted: Mon Oct 30, 2006 1:43 am
by MrCrowley
woah, nice guns mate,good job,

spudstuff how much do they cost you?cost me $115($70US) for that model

Posted: Mon Oct 30, 2006 1:50 am
by Triggahappy
Woah i wouldnt pay that, in aus we get them for like 20 bucks or 15 american

Posted: Mon Oct 30, 2006 2:47 am
by experament_u2
yhose are two of the nices guns iv seen in a while i would love one like it very nice job and fork it if the paint coat sucks it looks good to me

Posted: Mon Oct 30, 2006 9:06 pm
by ProfessorAmadeus
Thats not a real 1911 is it? I like the bipod on the other cannon. Did you make it youself?

Posted: Mon Oct 30, 2006 10:07 pm
by frankrede
I think I see a 12 gram co2 cap at the bottom.

Posted: Wed Nov 01, 2006 3:03 pm
by Slugfoot
Thats not a real 1911 is it?
......looks more like a Taurus to me.

A couple of nice clean looking cannons there mate. Is that a folding bipod on the other one?