Posted: Sun Oct 09, 2005 3:47 pm
i just use sharp scissors to cut it a bit bigger, then i even it out with a sander
Page 2 of 4
Posted: Wed Oct 12, 2005 4:21 am
DAM U... lol know i am going to have to spend even more money (i am a bit short on that) caz i like a compact spud gun. all i got is a pneumatic cannon and a combustion cannon know i want a compact one.nooooo.... can i have some money plz.( syupid job only paying $7.20 an hour... GRRR
Posted: Sat Jan 28, 2006 2:57 am
I love this little thing! I think I'm going to build one like it. Mind if I copy your design?
Posted: Sat Jan 28, 2006 7:43 pm
It's probably fine, eloctroshockman. Why would he submit it if he didn't want people to be able to do so?
And what can he do to you if you do anyway? Yell at you?
And what can he do to you if you do anyway? Yell at you?
Posted: Sun Apr 16, 2006 12:58 am
and does the neoprene have to fit perfectly inside the pipe
Posted: Sat Jul 15, 2006 3:08 am
Could you measure the inside of the chamber, and use a compass to trace where it will need to be cut?beebs111 wrote:can sum 1 tell me what is a good way to cut the neoprene to the right size because ive been havin sum trouble
EDIT : thanks spud shot ill try that.
Posted: Mon Jul 24, 2006 9:10 am
Don't jump me, but I would like a little more detail on his particularvalve build. Thanks
Posted: Tue Aug 01, 2006 6:08 am
does your bike pump leak? cuss i got the bell airstrike pump from walmart i think its the same one u have and it doesnt make a good seal with the schrader valve i cut of from a inner tube so i cant even ge it past like 15 psi unless im on steroids and pump reall really fas and hen quickly detatch it from the valve
Posted: Mon Oct 09, 2006 3:17 pm
I want to build one of these. Can you please send me the plans. Thanx!!
Posted: Mon Oct 09, 2006 8:42 pm
nice and simple but inovative. good idea have the pump on the gun.
Posted: Mon Oct 16, 2006 12:34 am
i believe he used a pvc disk as it says aboveRudesill Ballistics wrote:If I'm not mistaken he sleeved a PVC pipe into the wye, isolating the lower leg of the connector.
I cut a slot in the 1.5" pipe and stuck a butchered blowgun in it. Of course I had to seal the bottom leg of the Wye with a PVC disk. Unfortunately the trigger setup is pretty awkward, as you can see, it's up side down and a little low on the handle.
Posted: Tue Nov 14, 2006 1:57 am
Viper wrote:I want to build one of these. Can you please send me the plans. Thanx!!
Its just a small coaxile in a wye.
Posted: Fri Nov 24, 2006 6:39 pm
looks cool..
but i have two important questions for u
1) whats the point of it?
and
2)how powerful is it?
if u can tell me fps or range i will be happy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
but i have two important questions for u
1) whats the point of it?
and
2)how powerful is it?
if u can tell me fps or range i will be happy!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Posted: Fri Nov 24, 2006 7:57 pm
ubernoob^
this topic is dead- shot through the heart and left to bleed.
this topic is dead- shot through the heart and left to bleed.
Posted: Fri Nov 24, 2006 8:15 pm
Go on foxxlords site and you might find your answer.