Page 5 of 5

Posted: Thu Apr 17, 2008 9:41 am
by Antonio
nicely made! I am ganna make one of these as well. Instead of the popoff valve I am ganna use the valve that I used on my barrel hammer guns. Like this you can pump it up via the valve and initiate the shot.

Posted: Mon Apr 21, 2008 11:34 pm
by ghostman01
technically you could use this as a cartridge for a gun and have a magazine with about 3-5 of these around the 6mm- 8mm bore with 1/2" chamber and use some sort of hammer to pilot a schrader at the back?? hmm now thats a good idea, im designing one now

Posted: Tue Apr 22, 2008 12:04 am
by jackssmirkingrevenge
ajdevi92 wrote:technically you could use this as a cartridge for a gun and have a magazine with about 3-5 of these around the 6mm- 8mm bore with 1/2" chamber and use some sort of hammer to pilot a schrader at the back
That was the idea behind this project, in fact the cartridge I had made looks a lot like spudchucker's creation.

how to?

Posted: Sun Apr 27, 2008 9:55 am
by Jman99
Wow i really like this! Any chance you'll submit a how to with the step by step? I'd love to have one of these!

Posted: Sun Apr 27, 2008 2:48 pm
by JDP12
welcome to the forums, and search first please- JSR has a how to up somewhere about how to make something similar

Posted: Sun Apr 27, 2008 3:01 pm
by Sticky_Tape
I'll think about it right now my life is just too complicated just kidding.
I think you are taling about the pengun making tutorial by JSR.

Re: how to?

Posted: Sun Apr 27, 2008 3:06 pm
by bigbob12345
Jman99 wrote:Wow i really like this! Any chance you'll submit a how to with the step by step? I'd love to have one of these!

If you have anywhere near normal intellagence you should be able to figure that out with no effort at all. That is assuming you know how a piston valve works and have seen theinternals of a well made coax before.

Re: how to?

Posted: Sun Apr 27, 2008 3:33 pm
by Sticky_Tape
bigbob12345 wrote:
Jman99 wrote:Wow i really like this! Any chance you'll submit a how to with the step by step? I'd love to have one of these!

If you have anywhere near normal intellagence you should be able to figure that out with no effort at all. That is assuming you know how a piston valve works and have seen theinternals of a well made coax before.
UHHHHHHH yeah! what he said!

Posted: Sun May 11, 2008 1:52 pm
by Sticky_Tape
Well Today I was pumping up the gun and I heard a loud pop and all of the air came out of the gun I tried again but all the air kept coming out. After a while I thought that hey, maybe all of the air is coming out because the air pressure whent behind the faom disk and bursted a hole in the sealling face I got out my dremel and drilled out the back epoxy plug. Sure enough the sealling face had a pin hole in it sort of the way a aluminum burst disk looks like with the four triangle hing like things.
Sorry no pictures of that because after it happened I got right to work and trashed the old piston. Now I am going to put the gun back together I also got some good pics.

Posted: Sun May 11, 2008 2:06 pm
by Lentamentalisk
I'm gona hope that the picture of your cat is not to show us your next target, or how you hope you marker gun will look in the future...

Posted: Sun May 11, 2008 2:16 pm
by Sticky_Tape
No but in another post I put a picture of my cat under a blanket for a joke
btw what does your avatar mean? gotta ask to learn.

Posted: Sun May 11, 2008 2:49 pm
by MrCrowley
Sticky_Tape wrote:btw what does your avatar mean? gotta ask to learn.
Well it's in Spanish, and that's Fidel Castro, so the evolution of Cuban dictators?

Posted: Sun May 11, 2008 3:01 pm
by Lentamentalisk
no, Left is Hugo Chaves, of Venezuela, center, you are right is Fidel, and right is Evo Morales of Bolivia. The whole EvoluciĆ³n thing is a little pun that they had all over Bolivia when I went there, in support of Evo.

Posted: Sun May 11, 2008 3:06 pm
by MrCrowley
Ah well you learn something new every day :)

Posted: Sun May 11, 2008 3:16 pm
by Sticky_Tape
I heard he was a coca farmer...