Page 2 of 6

Unread postPosted: Sun Jun 06, 2010 9:17 pm
Author: deathbyDWV
Yeah that stuff needs air to cure. I would know... I had an egg drop project that it didn't dry into the box I put it in. I had to re-do it by spraying a bunch into a half-box and then cutting it to size. It ended up being very easy...
As long as one side is open it should dry fine...

That gun looks REALLY good. It will be so cool when finished...

Unread postPosted: Sun Jun 06, 2010 9:40 pm
Author: irisher
I don't know if it would work but you could try drilling holes in the pipes and leave them uncapped to give some extra air. You could also leave the butt end open to the air then install a plate later.

Unread postPosted: Sun Jun 06, 2010 11:02 pm
Author: Marffy
Can't w8 till you slap some paint on that. lets hope the hot glue holds togeter. Whats the mag holder made out of? good luck,i hope it turns out great.

Unread postPosted: Sun Jun 06, 2010 11:06 pm
Author: Ranger
Great gun, I want to see it finished.

Is the M203 going to be functional? It wouldnt be that hard to make it work.

Unread postPosted: Mon Jun 07, 2010 12:58 am
Author: Crna Legija
To make the m203 work you could use preloaded cartridge like davidvaini

why not make the stock out of wood

Unread postPosted: Mon Jun 07, 2010 9:58 am
Author: Gun Freak
-_- wrote:To make the m203 work you could use preloaded cartridge like davidvaini

why not make the stock out of wood


I could make cartridges but I wasn't planning on making the M203 work, but I had the idea to make it a small co-ax, but the performance would be terrible due to the small chamber. Cartridges could work but I would need a place to fill them, which I don't have.
I don't want to make the stock out of wood for a few reasons, 1) too heavy, 2) I don't like the texture, and 3) it would be too difficult with the tools I have.

Ranger wrote:Great gun, I want to see it finished.

Is the M203 going to be functional? It wouldnt be that hard to make it work.


Thanks, and answer above.

Marffy wrote:Can't w8 till you slap some paint on that. lets hope the hot glue holds togeter. Whats the mag holder made out of? good luck,i hope it turns out great.


Haha me either, this thing is dying of thirst for paint :twisted: The hot glue is actually holding up great. The parts glued on with hot glue are actually very strong.
The mag holder is some metal, I think aluminum, rectangular tubing that I had laying around, I just cut a little piece off with a hack saw.
Thanks.

@irisher and deathbyDWV, I sais I would make the frame, wrap it, then fill it and wait for it to cure with the butt plate off, and when it is dry I would put the plate on. Thank you all.

Unread postPosted: Mon Jun 07, 2010 2:39 pm
Author: clemsonguy1125
Great Stuff Might work but theres gotta be a better way, the tape and foam is a little ghetto, what about make the stock from blue insulation foam and covering it in something

Unread postPosted: Mon Jun 07, 2010 4:48 pm
Author: Zoltar9879
Great gun man. One question, does the grenade launcher work, or is it just a prop?

Unread postPosted: Mon Jun 07, 2010 5:21 pm
Author: Marffy
Zoltar9879 wrote:Great gun man. One question, does the grenade launcher work, or is it just a prop?


already answered, look at other posts...

Unread postPosted: Mon Jun 07, 2010 5:47 pm
Author: Heimo
clemsonguy1125 wrote:Great Stuff Might work but theres gotta be a better way, the tape and foam is a little ghetto, what about make the stock from blue insulation foam and covering it in something
yea make the stock from foam like above but cover it in fiberglass to make a sturdy yet lightweight stock

Unread postPosted: Mon Jun 07, 2010 5:50 pm
Author: Gun Freak
Stock is already taken care of, look in the first post for an update. I bought 10k bb's today and went though 3k in a matter of minutes :shock: dammit I didn't realize how much of an ammo hog this would be :P oh well.

Unread postPosted: Mon Jun 07, 2010 7:57 pm
Author: clemsonguy1125
Looks like your still having some feeding issues, the seconds vids better but the first wasn't feeding right, try using a lighter spring

Unread postPosted: Mon Jun 07, 2010 8:03 pm
Author: Gun Freak
Nope no feeding issues, I just didn't have enough bb's left in it for the spring to push on. The first 1000 to 1250 rounds fire off perfectly then they start to slow down because the spring can no longer push on them.

Unread postPosted: Mon Jun 07, 2010 8:20 pm
Author: clemsonguy1125
the first vid on point blank shooting it was feeding it just shot 1 bb in like 2 seconds, the second was awesome

Unread postPosted: Mon Jun 07, 2010 8:44 pm
Author: Gun Freak
Thats because in the second one I refilled the bb's back to the top so the plunger could push on them. When it is low on bb's it can't really fire down, it fires better level, but with the plunger working it can fire any direction. Jesus it has a high ROF though :? It's cool though, even my dad said so!