my mini forge (warning 4 dial-up)
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
this is my mini forge. It is still in the developmental phases but i'm definitely liking it. Judging by how fast this thing heats up the metal id have to say it's some where in the 2000*F It runs of propane and i have a mattress inflater pumping in air and it is quite loud. The container totally got totaled but i didn't expect it to last. I'm hoping to make some vortex blocks or other stuff. I'm am currently using a 2'' galv. cap as a crucible but im looking for a better one.
result
dadadadad da da daaaaaaa.....
and a vid.
result
dadadadad da da daaaaaaa.....
and a vid.
cool what material are you melting down and what are you making with it
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
aluminum, i can get it cheap from a scrap yard that is literally a mile and a half from my house.
are you using a sand mold or a wood mold and then are you gonna lathe it down smooth?
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
what are you trying to make?
4SPC, My 4" piston 3" porting cannon
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
Memo:
Fix up copper cannon
Fix up 4SPC
Start Stirrup pump
Start Toolies piston bazooka
dude was just looking at the pictures in greater detail did you have a 5 gallon plastic bucket filled with concrete and the center hollowed out and is that the 5 gallon bucket melting away?
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
a forge(at the moment) , soon maybe simple things like vortex blocks and ammoLikimysCrotchus5 wrote:what are you trying to make?
more like a 2 gallon bucket with a can in the middle.BigGrib wrote:dude was just looking at the pictures in greater detail did you have a 5 gallon plastic bucket filled with concrete and the center hollowed out and is that the 5 gallon bucket melting away?
nice what psi are you running off your propane regulator and did you light the propane before turning on the blower or after, and what did you use to light the forge? Oh yeah what diameter Glavi pipe is that 1.5"
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
i don't know what psi, i just use it as a flow reg. I light it with long nosed lighter and the galv. pipe is 3/4''. dude this thing i basic
hell if it works it works that's all that matters right, and dude are you really in olympia
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
thats awesome i'm in E WA down in tri cities
<a href="">DONT TAZE ME BRO.. DONT TAZE ME... AHHHH</a>Yea, that's definitely going to get you at least a tazer.
facebook.com/biggrib
- homedepotpro
- Specialist 4
- Posts: 443
- Joined: Sun Nov 26, 2006 1:00 am
Im headed out to Pasco tomorrow for Cross Country state