Page 2 of 3

Unread postPosted: Thu Jan 19, 2006 7:15 am
Author: Urban Ninja
What were you doing with a dildo in the first place :shock: ? I mean arnt you a guy, or do you have a sister :? ? You should have put a parachute on it! would have been funny!

Unread postPosted: Thu Jan 19, 2006 5:07 pm
Author: nicholai
dude im 22 years old, i got a horny girl that i like to get down with :D
and no i dont use it on myself u queer...lol

i thought it might be a good projectile because it was one of those dildos that isnt shaped like a dick, its like a really aerodynamically shaped bullet, but it wasnt a big enough diameter (thank god, i love tight pus...)

Unread postPosted: Thu Jan 19, 2006 5:55 pm
Author: jrrdw
who ever thought my home made ammo post thread would turn out to be like this, a online jerry springer show, white trash/trailer park liven/bunch of ho's airing out sex lives-to freaken funny !!!! hey we left out the klan, where did that bunch of self richous nut jobs go? their probly getten chased down the street, with their arms flailing in the air screaming like little girls !

Unread postPosted: Mon Jan 23, 2006 4:21 pm
Author: dragon finder
make a projectile ot of ballistics gel so that when it hits something it will splater like a dence water balloon or fill it with paint or something els

Unread postPosted: Tue Jan 24, 2006 6:14 am
Author: nicholai
grab an old funnel from your garage, must be made of metal!

cut a wooden block (a 4" x 4" fence post works great) and make a mold out of it for your "bullet". The center of the wooden mold should have a small pinhole drilled through the center so when it cools down it can simply be pushed out.

cut up some milk juqs into fine strips and fill the funnel to the top, you're going to be melting this plastic and forcing it through the funnel bottom into your wooden mold. Grab the pliers or even clamp up the funnel and heat it up using a propane torch.
Of course this isnt a guide in plastic molding but maybe an idea on how to make some cheap homemade ammo out of common rubbish material

Unread postPosted: Tue Jan 24, 2006 7:15 am
Author: jrrdw
way to recycle, that is good thinking, have you ever made any plastic ammo like that ? or is that off the top of your head ?

Unread postPosted: Tue Jan 24, 2006 4:35 pm
Author: nicholai
well ive made some simmilar but i didnt melt them by hand, i squirted the hot plastic from an injection molding machine, into my hands (with leather gloves) and formed them by hand, i think the pics are at the beginning of this thread (i used grey poly instead of clear)

Unread postPosted: Tue Jan 24, 2006 5:53 pm
Author: jrrdw
went back didn't see any pics but would like to, i've used a simular machine to press hot plastic into screw driver handles, started out as black little beeds dumped them in the top pulled the handle hot plastic squirted out a little nipples, (hahaha i said nipples hahaha), into a mold, someone else was setten up the molds for me, this was about 35 years ago 7 grade shop, post the pics of your ammo

Unread postPosted: Tue Jan 24, 2006 8:52 pm
Author: nicholai
whoops different thread,

http://www.spudfiles.com/forums/viewtopic.php?t=1226&

the pics i took were removed from my old site when i transferred it to spudshot.com

whoops

Unread postPosted: Tue Jan 24, 2006 9:51 pm
Author: dragon finder
but won't the plastic get fryed to the funnel :?

Unread postPosted: Tue Jan 24, 2006 10:05 pm
Author: nicholai
not if its evenly heated, plastic melts between 300 and 400 degrees farenheit, it would take a skilled plumber to torch a steel funnel with plastic in it without burning. ive never tried it myself but it might be an easy way to mold solid plastic slugs for the home builder

Unread postPosted: Wed Jan 25, 2006 8:24 am
Author: jrrdw
put the plastic in a pot, put the plastic holding pot in a bigger pot, then fill the bigger pot with water, set to boil untill the plastic melts as much as u need it to, this will heat it evenly and will not set it on FIRE yes plastic is combustable/not safe to heat with a tourch

Unread postPosted: Wed Jan 25, 2006 10:47 pm
Author: boilingleadbath
The melting point (does it technicaly have a melting point?) of plastic is much higher than that of water... but an oil bath might work. (like a double boiler with oil)

Unread postPosted: Wed Jan 25, 2006 11:00 pm
Author: nicholai
yeah jjrw has a better idea to heat the plastic, you need to heat the plastic evenly to ensure that its all melted evenly,
the press im working on now uses three 250 watt heater bands that will be strapped like hose clamps to an "injection barrel" which will hold the plastic until its in an amorphous (thick liquid) state. heres a crappy pic i showed pimpmann earlier tonight:



Image

the press will simply mold solid plastic or rubber bullets that fit perfect into a spud gun barrel.

Unread postPosted: Thu Jan 26, 2006 2:51 pm
Author: jrrdw
thats a good idea spudshot-i wonder if your going to loose heat through the container thats holding the melted plastic, these heater bands mite be 250 rite at the band but will that much transfer through to the plastic?