Hot Glue Piston

Potatoes last one shot, so build reusable! Discuss ammo designs and ideas. Tough to find cannon part or questions? Ask here!
User avatar
Hydra
Specialist
Specialist
Posts: 131
Joined: Sat Mar 08, 2008 11:58 pm
Location: New South Wales, Australia

Tue Mar 11, 2008 3:22 am

Ok, Im ready to make my first piston cannon, and the piston will be made from HOT GLUE!! :shock:

Anyways, in most pistons there is a screw going through the middle of the whole thing to secure the piston inside. But lots of people have said that pistons move back really fast, and i think that the the screw will slowly wear away the hot glue. Will it really happen? Or am i been to cautious.
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Tue Mar 11, 2008 3:36 am

The bolt going through the middle is usally to hold the sealing face on, and/or to secure a bunch of washers and other bits and bobs.

Yes pistons move back, really fast. You need a bumper remember. The bolt, not screw, will be fine as long as you have a decent bumper.

Hot glue is a common material for pistons, just look at other peoples hot glue pistons for reference.

God, it seems like you need less and less knowledge to build pistons these days... :roll:
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 321 times

Donating Members

Tue Mar 11, 2008 3:37 am

Hydra wrote:Anyways, in most pistons there is a screw going through the middle of the whole thing to secure the piston inside.
That screw is usually there to secure the rubber sealing face to the piston.
hectmarr wrote:You have to make many weapons, because this field is long and short life
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Tue Mar 11, 2008 3:42 am

Muwahaha, MrCrowley FTW! :D


You're getting slower jack.... :roll: :wink:
User avatar
Hydra
Specialist
Specialist
Posts: 131
Joined: Sat Mar 08, 2008 11:58 pm
Location: New South Wales, Australia

Tue Mar 11, 2008 3:59 am

lol ok
TY for the help
EDIT: W8...But how does the piston stay secured inside? I mean if your piston housing is inside a Tee, what stops it from falling inside the 90Degree bit.
User avatar
jackssmirkingrevenge
Five Star General
Five Star General
Posts: 26179
Joined: Thu Mar 15, 2007 11:28 pm
Has thanked: 543 times
Been thanked: 321 times

Donating Members

Tue Mar 11, 2008 4:42 am

Curses, foiled again!

:shock:
You're getting slower jack...


That, or I'm busy at work :P :D
hectmarr wrote:You have to make many weapons, because this field is long and short life
bluerussetboy
Specialist 2
Specialist 2
Posts: 265
Joined: Fri Nov 02, 2007 12:25 pm

Tue Mar 11, 2008 6:12 am

Hydra wrote:lol ok
TY for the help
EDIT: W8...But how does the piston stay secured inside? I mean if your piston housing is inside a Tee, what stops it from falling inside the 90Degree bit.
your barrel should come into your tee about halfway and your piston should ride in a sleeve. also the dimensions of your piston matter, your piston should be longer than the diameter is wide. you definitely need to do some more research on barrel sealing pistons after that question. :?
User avatar
MrCrowley
Moderator
Moderator
Posts: 10078
Joined: Fri Jun 23, 2006 10:42 pm
Location: Auckland, New Zealand
Been thanked: 3 times

Tue Mar 11, 2008 1:59 pm

bluerussetboy wrote:you definitely need to do some more research on barrel sealing pistons after that question. :?
Agreed.
User avatar
TNW_NL
Private
Private
Posts: 12
Joined: Fri Dec 07, 2007 6:13 pm

Tue Mar 11, 2008 2:34 pm

I don't want to spoil the fun, but I have seen hot glue projectiles shatter into pieces. The pieces are not sharp or anything, but hot glue in its cold state is not unbreakable. It could break when used as a piston.

Still, I think projectiles have to cope with more kinetic energy than a piston. A piston only has to move a little bit and then it will be stopped. Most pistons have bumpers to reduce the shock anyway....

Off topic:
Help Bring Back Endangered Species and Control World Population - Feed a billion Chinese to your very own T-Rex
Somehow the humour of this signature is beyond me. T-Rex's are extinct so not endangered by definition. I also wonder why it have to be the Chinese, are you implying they are the main cause of the world's "overpopulation"(a controversial topic on its own)?
"I say we take off and nuke the entire site from orbit. It's the only way to be sure."
SNDM
Private 4
Private 4
Posts: 84
Joined: Tue Feb 26, 2008 4:05 pm

Tue Mar 11, 2008 3:07 pm

A good bumper should ease its pain, I use O rings.

Are you Chinese, Im getting the vibes you see?
User avatar
watto
Specialist 3
Specialist 3
Posts: 327
Joined: Wed Dec 13, 2006 5:47 pm
Location: Australia

Tue Mar 11, 2008 10:23 pm

Help Bring Back Endangered Species and Control World Population - Feed a billion Chinese to your very own T-Rex
Somehow the humour of this signature is beyond me. T-Rex's are extinct so not endangered by definition. I also wonder why it have to be the Chinese, are you implying they are the main cause of the world's "overpopulation"(a controversial topic on its own)?
dude we get it your chinese, just take a joke everyone knows there are way too many chinese thats why they're only allowed one kid, signatures dont have to make sence as long as they make ppl laugh :lol:, dont pick his apart :idea:
Last edited by watto on Sun Mar 16, 2008 1:53 am, edited 1 time in total.
User avatar
judgment_arms
Sergeant 3
Sergeant 3
Posts: 1272
Joined: Tue Oct 17, 2006 8:49 pm
Location: Not so beautiful North Carolina, but at least it’s the U.S.A.!

Wed Mar 12, 2008 9:01 am

One piece of advice on hot glue pistons:
never leave them out in the heat, I left a 1.25in, .75in porting, piston valve in the barn and it got hot enough to melt the glue enough to make the already snug piston seize up, in the open position no less, and it wouldn’t budge even at 110psi.
On the other hand it effectively sealed off the end of the pipe…
Call me "Judge", it's easier to type.

Spud gun safety rules
User avatar
TNW_NL
Private
Private
Posts: 12
Joined: Fri Dec 07, 2007 6:13 pm

Fri Mar 14, 2008 9:18 pm

watto wrote:lolol dude we get it, your chinese, or your not chinese and you think acting politically correct makes you appear smart, whichever it is just take a joke everyone knows there are way too many chinese thats why theyre only allowed one kid, signatures dont have to make sence as long as they make ppl laugh :lol:, so dont pick his apart
First, you pretend to speak for everyone. I don't think that you can speak for everyone here.
Second, it is you're not your. (I am actually pointing this out to someone who is a native English speaker... :shock: )
Third, what would you say if my opinion was that there are too much Australians or Americans on this world?

I am not Chinese at all. I am just concerned with the arrogance of certain people on this world. Pointing fingers all the time.
Ever bothered to look into demographics? In more wealthy countries, birth figures are down. That means, if more countries get up to the standard of western countries people will get better education, better and more humane birth control (access to contraception methods).

Yeah, I know this is all very off topic, but I cannot just watch people make unsubstantiated remarks and blaming certain people in general for overpopulation.
"I say we take off and nuke the entire site from orbit. It's the only way to be sure."
User avatar
ghostman01
Specialist 3
Specialist 3
Posts: 372
Joined: Fri Nov 23, 2007 9:15 am

Fri Mar 14, 2008 9:27 pm

Third, what would you say if my opinion was that there are too much Australians or Americans on this world?
i believe that would be too many Australians . sorry just thought id add my part
Image
Ultimateforum
I have 27 different kinds of weapons in my home, do not attempt to trespass........!
User avatar
watto
Specialist 3
Specialist 3
Posts: 327
Joined: Wed Dec 13, 2006 5:47 pm
Location: Australia

Fri Mar 14, 2008 9:32 pm

yeh you f*ckwit, if your gunna pick me up on not using an apostrophe then you better make damn sure your post is spotless....

hehe I love winding up these kids who think using big words makes everyone think they're smart...oh by the way your intelligence is unsubstantiated.
Post Reply