Page 1 of 2
what to do with this
Posted: Wed Jul 02, 2008 11:13 am
by Sticky_Tape
I bought this air cylinder for 20 bucks a while ago just cuz I thought it was cool I am wondering what mayhem I can cause with it. It has 1/2'' threads on the side with the rod it can screw into a 1/2''-3/4'' bushing.
Any Ideas?
Posted: Wed Jul 02, 2008 11:21 am
by pizlo
Make a handheld hybrid? High pressure pnue? I don't think theres anything to do with it besides use it as a chamber...
Posted: Wed Jul 02, 2008 11:30 am
by Sticky_Tape
I was thinking some kind of valve.
Posted: Wed Jul 02, 2008 12:29 pm
by potatoflinger
Posted: Wed Jul 02, 2008 12:42 pm
by Ragnarok
I assume it's the
FDA model, with the 20mm bore and the 150mm stroke?
You didn't take a very good picture of the model number, so I'm guessing a little here.
150mm stroke is a bit more than you might find useful. If it were shorter, I might suggest using it like Neospud has on some of his semis, particularly something like the
Cylbolt
However, my suggestion for a long-ish stroke cylinder is using it to do something like set the draw string on a homemade crossbow... perhaps not quite as mad as the Van Helsing one (although I do have plans for one of those...)
I don't see how using it as a valve would be practical, although if you have an idea, please share it.
Posted: Wed Jul 02, 2008 1:28 pm
by Gippeto
Posted: Wed Jul 02, 2008 1:36 pm
by Sticky_Tape
Ragnarok wrote:I assume it's the
FDA model, with the 20mm bore and the 150mm stroke?
You didn't take a very good picture of the model number, so I'm guessing a little here.
150mm stroke is a bit more than you might find useful. If it were shorter, I might suggest using it like Neospud has on some of his semis, particularly something like the
Cylbolt
However, my suggestion for a long-ish stroke cylinder is using it to do something like set the draw string on a homemade crossbow... perhaps not quite as mad as the Van Helsing one (although I do have plans for one of those...)
I don't see how using it as a valve would be practical, although if you have an idea, please share it.
The model number thing that it says on it is FDA20/150-S
I will see if I can draw somthing up.
Posted: Wed Jul 02, 2008 1:38 pm
by SpudFarm
hmm mabe it can open a ballvalve pretty fast?
Posted: Wed Jul 02, 2008 1:51 pm
by Sticky_Tape
This is what I drew up
Posted: Wed Jul 02, 2008 1:59 pm
by trollhameran
how much force does the ram have behind it?
Posted: Wed Jul 02, 2008 2:25 pm
by TurboSuper
Why not just use it as a pneumatic boxing glove
Posted: Wed Jul 02, 2008 2:44 pm
by Sticky_Tape
trollhameran wrote:how much force does the ram have behind it?
That's a big ?
Posted: Wed Jul 02, 2008 4:49 pm
by SEAKING9006
I'd use it as part of a psuedo-blow back valve gun.
Posted: Wed Jul 02, 2008 6:52 pm
by TwitchTheAussie
TurboSuper wrote:Why not just use it as a pneumatic boxing glove
That would be cool to see. Make it punch spuds
Posted: Wed Jul 02, 2008 7:12 pm
by sandman
mashed potatoes