Page 1 of 1

Source of copper pipe

Posted: Thu Sep 03, 2009 4:59 am
by Spooky
I'm building a what I aim to be a compact coaxial and after some planning and mucking around with GGDT I decided to use a 10mm barrel.

I ordered from eBay (oops) what claimed to be a "straight 1000mm length" of 10mm copper pipe. When it arrived it was anything but. I'm not sure if it was really a length from a coil, or if the Royal Mail had just decided to tie my parcel to the back of their van and drag it down the M27.

Long story short, looking for a supplier of straight 10mm pipe in the UK. Google's not finding much.


Edit: The other option is to get something like this but I'm pretty sure I can't solder that to copper. I was going to use two copper reducer couplings to step the size up to the chamber. If I epoxy one to this aluminum pipe instead of solder will it hold? I was looking at using about 350 PSI.

Posted: Thu Sep 03, 2009 5:28 am
by inonickname
I've epoxied the same pipe to brass fittings with no problem. Just roughen up the contact surfaces extremely well and give the epoxy plenty of time to cure.

Posted: Thu Sep 03, 2009 5:44 am
by qwerty
You can get that alluminium at b and q and ive had it up to 300 psi so it seem to be a good choice. :)

Posted: Thu Sep 03, 2009 5:47 am
by FORE!!!!
10mm copper pipe is pretty uncommon,altho 15mm is common and you will have better luck finding that,


It is a royal pain to try and solder aluminum and to solder the two together would not generally last due to the corrosion form the dielectric activity in the two dissimilar metals.

Posted: Thu Sep 03, 2009 6:21 am
by UKSGC
B & Q also sell these which are as good as straight

http://www.diy.com/diy/jsp/bq/nav.jsp?a ... arch=false

Rub the chrome off with a little wet and dry and solder away.

Posted: Thu Sep 03, 2009 6:00 pm
by theBOOM
Off subject but... Those anyone know where to find type K copper... its the strong type of pipe when it comes to pressure rating but my hardware stores only have type m and l ... I went to 7 different ones looking for it... 5 didnt know what it was / had never heard of it ... and the 2 that did know told me that I had to order like 3 meters of it :x ..

I would order on the internet but my parents won't let me use their credit card...

Posted: Thu Sep 03, 2009 6:03 pm
by Technician1002
theBOOM wrote: I would order on the internet but my parents won't let me use their credit card...
Pick up a pre paid gift debit card. Check first if the online retailer will take one. Not all will.

Posted: Thu Sep 03, 2009 6:05 pm
by spudtyrrant
theBOOM wrote:Off subject but... Those anyone know where to find type K copper... its the strong type of pipe when it comes to pressure rating but my hardware stores only have type m and l ... I went to 7 different ones looking for it... 5 didnt know what it was / had never heard of it ... and the 2 that did know told me that I had to order like 3 meters of it :x ..

I would order on the internet but my parents won't let me use their credit card...
its expensive but you can get it at lowes or home depot where i live

Posted: Thu Sep 03, 2009 6:10 pm
by theBOOM
Lol I dont care if its expensive cant be more than 10 or 15 dollars the meter... and I've checked and my homedepot nor lowes carries it .. only type m and l...