Page 1 of 2

Tried epoxy and JB Weld...

Unread postPosted: Sun May 16, 2010 11:30 am
Author: Gun Freak
Well I am trying to stick a stop nut onto my bolt ation golf ball loader. I tried to epoxy it twice, and I JB Welded it overnight and it still broke off. It if directly on the barrel so I can't drill it or puncture it with anything... what do you recommend I use? I tried taking pics but my camera is a piece of fecal matter and the flash screws everything up, plus it won't stay on for more than 2 seconds at a time.

Unread postPosted: Sun May 16, 2010 12:09 pm
Author: clemsonguy1125
Did you try replacing the batterys on your camera

Unread postPosted: Sun May 16, 2010 12:14 pm
Author: Gun Freak
Yeah they are brand new. Piece of crap camera.

Unread postPosted: Sun May 16, 2010 1:05 pm
Author: jrrdw
Get into the settings, you can change the shut off time, it's a battery saving feature. You can also turn the flash off, but you will have to hold the camera very still to get a clear picture. When I turn my flash off, I set the camera down and use the timer.

Unread postPosted: Sun May 16, 2010 1:15 pm
Author: Gun Freak
I don't think there is a setting to turn off in 2 seconds... I don't have enough time to turn off the flash and take a picture. I think I solved my gluing problem, i just got a little piece of pvc glued together and welded it to the barrel, but it jsut broke off when I was shooting it for somebody so I have to reglue it. It was working good though... :(

Unread postPosted: Sun May 16, 2010 1:30 pm
Author: jrrdw
As long as you keep pushing buttons the camera should stay on. Unless the options just wheren't built in....

Unread postPosted: Sun May 16, 2010 2:15 pm
Author: Gun Freak
Yeah that's what I have to do... just keep pressing the focus button until I take the picutre, but after each pic it turns off.

Unread postPosted: Sun May 16, 2010 4:10 pm
Author: MrCrowley
I always let JB-Weld cure for 3 days before even touching it. Yes I know it says curing time is 24 hours, but I've had much better results waiting several days before even sanding it down.
Maybe try some Araldite.

Unread postPosted: Sun May 16, 2010 5:10 pm
Author: Gun Freak
Well I've already welded a piece of pvc to the barrel, no way that can come off.
Image
Image

Unread postPosted: Sun May 16, 2010 7:43 pm
Author: clemsonguy1125
I had solvent weld come undone on some think like that but I didn't put it in a vise

Unread postPosted: Sun May 16, 2010 7:43 pm
Author: Gun Freak
ahh this is drenched in glue and it is primed, let it sit for 2 hours at a time, so not a chance.

Unread postPosted: Sun May 16, 2010 7:45 pm
Author: clemsonguy1125
So how does the bolt loader work a video perchance

Unread postPosted: Sun May 16, 2010 7:51 pm
Author: Gun Freak
Vid tomorrow maybe when its done

Unread postPosted: Sun May 16, 2010 8:00 pm
Author: clemsonguy1125
Ok cool, does it leak at all

Unread postPosted: Sun May 16, 2010 8:01 pm
Author: Gun Freak
my valve? or the bolt action loader? the loader is seperate from the barrel so no.