2 1/2 thin wall imposible to find.

[8tonsemi]

Plumbing supply stores don't sell it around me. Is it not avalible in the US.

[dewey-1]

Plumbing supply stores don't sell it around me. Is it not avalible in the US.

Try here!

http://flexpvc.com/cart/agora.cgi?produ ... E-Class200

[mattyzip77]

why do you want 2 1/2 inch thin wall?? Just curious. Keep in mind, 2 1/2 pipe needs 2 1/2 inch fittings...

[dewey-1]

You have to ask for Class 200 which is SDR21 (200psi) .147 inch wall or Class 160 which is SDR26 (160psi) .120 wall.

2-1/2 SDR21 has nominal ID of 2.581 inch.

2-1/2 SDR26 has nominal ID of 2.635 inch.

[8tonsemi]

Sorry I should have been more specific. I want to shoot soda cans so class 160.

[Spud Destruction]

Have you gone to an irrigation store. They usually have a lot of supplies and sizes there

[Technician1002]

Shooting soda cans is lots of fun. It's the sudden stop at the tree that is spectacular.

[D_Hall]

Have you gone to an irrigation store. They usually have a lot of supplies and sizes there

If you don't live in an area with a lot of agriculture, there probably ISN'T an irrigation store.

[mattyzip77]

Did you try Pipe Plus???

[MrCrowley]

If that's the case, check a plumbing store with a trade section (i.e. most plumbing stores). Some will front as a kitchen/bathroom store with a trade section out back stacked to the roof with a variety of plumbing pipes, fittings and accessories.

That's how it is here anyway, might be done different in the States.

[Technician1002]

I'm in the US. Big bos stores don't carry it as it is not a home improvement item. As mentioned earlier, find out where the trades shop for industrial systems. That is how I got mine.

Hint in the US, look for http://ferguson.com/ Not all locations have it in stock, but they can order a 20 foot section for you. Find a buddy that wants to split it with you. I did. Did I mention they do commercial sizes?

[Spud Destruction]

Fergeson or Ewing irrigation i have 2 of each in my town, i guess i'm lucky also you may want to check HVAC Supply stores. I used to install forced air heating units. They all required 2 1/2 pipe for exhaust.

[jsefcik]

i store by me carries it!!!!lucky me!

[mattyzip77]

too bad you dont know how to make a working cannon out of it!!!

[jsefcik]

too bad you dont know how to make a working cannon out of it!!!

all my cannons work 100 percent!!! so hush boy! lol