Page 1 of 1

TSCC50 (Tactical Stealth Combustion Cannon 50")

Unread postPosted: Thu Jun 11, 2009 3:21 pm
Author: mikemurph
This is my latest combustion gun, the TSCC50. This gun measures 50" long. I finished painting it today, I hope you like the custom camouflage. I built a mock suppressor for it out of PVC. It shoots very well, and I am proud of the damage. I made ammo for it while the paint was drying http://www.spudfiles.com/forums/viewtopic,p,248031.html#248031
Hope you like, and damage pictures will be up soon.

Me shooting the TSCC50

Image

A picture of the whole cannon (ruler for reference it is 47" long)

Image

A close up on the chamber and foregrip

Image

A close up on the chamber

Image

close up on the foregrip

Image

Close up on the barrel (to see the paint job)

Image

Close up on mock suppressor

Image

I would really like some feed back on this cannon


*no animals were harmed in the making of this cannon*

Unread postPosted: Thu Jun 11, 2009 3:48 pm
Author: spudmanb3
Nice gun, kind of ghetto though-lose some of the tape. And the camo is kind of shiny , might not camoflauge you too well

Unread postPosted: Thu Jun 11, 2009 4:01 pm
Author: mikemurph
Its just a glare

Unread postPosted: Thu Jun 11, 2009 10:47 pm
Author: Gaderelguitarist
Camo shouldn't glare at all. It defeats the purpose.
What kind of igniter is that? Just a stripped down piezo?

The fact that its a drink bottle as the chamber turns me away, as well as the rail that's mounted on the crooked chamber.

I'm not trying to sound harsh, its just constructive criticism.

Unread postPosted: Fri Jun 12, 2009 2:31 am
Author: rikukiakuchiki777
Does the chamber continue into the stock? i.e. Is the stock hollow, part of the chamber?

Unread postPosted: Fri Jun 12, 2009 2:37 am
Author: inonickname
Far too ghetto for me, and I'm not impressed all that much by chamber selection.

Though if you ripped off the tape, wacked on a PVC chamber and smoothed it out it would be a very credible cannon.

Have fun

Unread postPosted: Fri Jun 12, 2009 12:31 pm
Author: mikemurph
The stock is not part of the chamber even though it is hollow
It is a piezo lighter
and The bottle work very good as a chamber
The glare is from the light being too bright, and a piece of crap camera
The rail is not crooked, I don't know what you are talking about
And Im planning on making the chamber more legitimate
how about this for the chamber:
Image
Sorry its a bad pic

Unread postPosted: Fri Jun 12, 2009 4:19 pm
Author: Gaderelguitarist
A fire exstinguisher would be excellent as a chamber as long as you can properly insulate the ignition wires.

From your first couple pictures it looks as though the rail is not parrallel with the barrel, making it useless for mounting a scope. Thats what i mean when i say its crooked.

Unread postPosted: Fri Jun 12, 2009 4:46 pm
Author: mikemurph
I just didn't have it screwed on all the way