Posted: Thu Aug 04, 2005 6:34 am
yes, actually it is, I I (the I's are electrodes, the _'s are wire
I__I I__I
I__I
I__I I__I
I__I
Page 2 of 3
Posted: Sat Sep 10, 2005 5:15 pm
what did he use to make it so he could change barrels
Posted: Sat Sep 10, 2005 5:20 pm
It is a breechloader that uses cam lever couplings in the breech loading system.
There are multiple barrel attachments too, like a Breech Loadable Rifled 1.5" SCH 40, Breech Loadable Smoothbore 1.5" SCH 40, Sleeved Golf Ball Barrel, and 2.5" SCH 40 Tennis ball barrel. This gun can also use the burst disk attachment and its various size barrels. Quadzilla will soon be getting a 3" barrel for pop cans/bottles and a 2" barrel for limes and large spuds.
Posted: Thu Dec 01, 2005 12:23 am
damn that kicks ass some serious pwnage with that.Posted: Thu Jan 12, 2006 9:14 pm
all i have to say is SWEET 8)
Posted: Thu Feb 02, 2006 10:19 pm
the way that he shows to wire sparks in his website is just an ultra simplified version of it. in one of the pictures you can see a closeup of the wiring... what he did was he wen from the taser, to the left of the picture... then on the inside the electricity jumps a gap and goes to the small one on the right... then it goes to the long one, then to the other short one, then to thetaser again
Posted: Mon Feb 20, 2006 4:00 am
Exelent gun paint job is awsome 
how big pipe did ya use?[
NOTE FROM PIMPMANN22: Please read other posts... This was dicussed then answered on the 4th post I belive.
how big pipe did ya use?[NOTE FROM PIMPMANN22: Please read other posts... This was dicussed then answered on the 4th post I belive.
Posted: Wed Mar 15, 2006 9:33 pm
How did you atach the wires and how did you attach the barrels to the chamber. I am confused 
Posted: Thu Mar 16, 2006 8:17 pm
Electric current is carried into chamber through bolts.
Barrels are connected with so-called "banjo couplers". The specific ones used here have threaded (NPT) attachments, and are screwed (more or less permenatly, in this case) onto some threaded adapters which are solvent welded (bit like gluing) to the pipe.
Barrels are connected with so-called "banjo couplers". The specific ones used here have threaded (NPT) attachments, and are screwed (more or less permenatly, in this case) onto some threaded adapters which are solvent welded (bit like gluing) to the pipe.
Posted: Fri Apr 14, 2006 11:41 pm
To get 1 spark
To get 2 sparks
To get 3 sparks
To get 4 sparks
It makes no difference which is negative and positive.
inside the barrel.
hope this helps with wiring.
and this is my first post and im helping some ppl. good luck
-jets
To get 2 sparks
To get 3 sparks
To get 4 sparks
It makes no difference which is negative and positive.
inside the barrel.
hope this helps with wiring.
and this is my first post and im helping some ppl. good luck
-jets
Posted: Tue Dec 19, 2006 5:41 am
looks like the old school nice flames, nice paint jobs.... cool you got the taiser for your igniter, it mus cost a lot 
no prblems in igniting ey
no prblems in igniting eyPosted: Tue Dec 19, 2006 5:45 am
STFU! 
Stop bloody spamming! 15posts in one day,your first day, and most are not releavant,have been said before,don't need to be said and are digging up old topics 8months old.
Stop bloody spamming! 15posts in one day,your first day, and most are not releavant,have been said before,don't need to be said and are digging up old topics 8months old.Posted: Thu Jun 14, 2007 10:33 pm
ok, iv been tryin to annialate a tennis ball for years, but havnt been able to find a barrel to do so. I was wondering what you used
thanks so much
thanks so much
Posted: Thu Jun 14, 2007 11:34 pm
Correct me if I'm wrong but, I dont believe boogieman posts on this site. However he used 2.5" sch 40 pvc pipe. Next time use the search function or look it up on the wiki.
Posted: Fri Jun 15, 2007 2:45 pm
woah, iv been looking for 2.5" pvc for a loooonnggg time and have never found it. I figured it didnt exist. Wait so it does?
thanks
thanks