Page 1 of 1

propane nuke tube

Posted: Wed Sep 08, 2010 10:50 am
by NuKe..TuBe..420
well this is my second gun ive made the only problems ive had is the ignitor so i ordered a electric ignition system i hope it works better if any one has iseas or see's a problem in my gun let me know

Posted: Wed Sep 08, 2010 11:30 am
by qwerty
Looks good but your reducer looks like DWV

Posted: Wed Sep 08, 2010 11:45 am
by NuKe..TuBe..420
dwv what would that be? my grandpa is a plumber so i got the matrial from him its all sch 40 pipe is that reducer bad to use or something thanks for your input

Posted: Wed Sep 08, 2010 12:46 pm
by Fnord
DWV= drainage, waste, vent. Not rated for pressure.

As long as it isn't cellular-core you should be ok using dwv for a combustion(In all probability it isn't. Not sure about your chamber pipe though).

As has been said countless times, sch40 is a wall thickness, not a pressure rating. If you want to use pvc in a pneumatic it should have"nsf-pw" printed on the fitting or pipe(It indicates use in pressurized water systems).

Posted: Wed Sep 08, 2010 7:48 pm
by Technician1002
Fnord wrote:DWV= drainage, waste, vent. Not rated for pressure.

As long as it isn't cellular-core you should be ok using dwv for a combustion(In all probability it isn't. Not sure about your chamber pipe though).
Cellular Core ABS is great for traditional combustions. See my sig for a link to an ABS test.

I do agree that PVC DWV should not be used. It's fragile.

Posted: Wed Sep 08, 2010 9:27 pm
by bighead33
and that's not all he also drilled his electrodes strait onto his chamber wall :shock: . i really hope you aren't planing on firing this this any time soon.

Posted: Wed Sep 08, 2010 9:36 pm
by Lockednloaded
I thought we came to the conclusion that DWV is fine for advanced combustions. Now, lets take the DWV, ABS, XZY argument somewhere else.

Great gun for a second, It may need some cleaning up. Once you get your electronic igniter you can mount that plus your fan circuit in a nice looking project box.

Do you get consistent results with that meter?

Welcome to Spudfiles

Posted: Wed Sep 08, 2010 9:50 pm
by NuKe..TuBe..420
yea i put about 40 psi in it turn on the fan and it shoots a potato about 400 yards everytime and im just waiting for my electric ignition to get here to finish evrything up i have a box to mount all my switches in i hate the push button ignitors they always give me problems and as far as my ignition being drilled into my chamber wall every gun ive made has been like that and its never been a problem

Posted: Thu Sep 09, 2010 12:12 am
by Technician1002
My DWV cannon has a fill through the side in a single layer and it has shown no signs of failure. My Mouse Musket fills through a single layer. Overall I have not seen much evidence showing many failures due to the placement of small holes in pipe. Joints, end caps, and fatigue failure of components appears to be more common.

Posted: Thu Sep 09, 2010 3:13 pm
by NuKe..TuBe..420
this gun is less than a week old and ive shot it about 50 times and there's no signs of failure anywhere on some of my past guns which were none propane there would always be burn marks next to my ignitor which i didnt like so know i put some seal all around which can withstand temps up to 180 and its seems to work pretty gun i didnt a test fire today with a 6 ft wire on my ignitor and about 60 psi of propane and i shoot a apple about 700 yards :D it was pretty crazy im in the prosses of making another one out of stronger pipe my goal is to be able to shoot 1000 yards which is the lenght of my corn fieald behind my house

Posted: Thu Sep 09, 2010 3:21 pm
by NuKe..TuBe..420
where can i get a project box at im having trouble finding a good one??

Posted: Thu Sep 09, 2010 4:54 pm
by Technician1002
Radio Shack carries some project boxes. If you don't have one nearby, or they don't carry them, Mouser has them.

As far as reaching the far end of the corn field, good luck. You will need good sectional density and an aerodynamic projectile to reach that far.

http://www.mouser.com/
Project boxes are on this page. They call them enclosures. Project box is a nickname.
http://www.mouser.com/Enclosures/Enclos ... ox&FS=True

Posted: Fri Sep 10, 2010 12:15 pm
by NuKe..TuBe..420
okay ill check them out thanks and as far as the projectile i have a junk of t4 aluminum that weighs next to nothing an i machine it down to fit in my barrel im hopen it will shoot ok do you have any ideas on a projectile that could reach that distant??